Netopia Popular Questions, Answers, Tips & Manuals

Open browser and type IP address and loging using username and password.Once logged in, click on the Expert Mode link in the left-hand side menu (if that link is visible). In the Expert Mode Confirmation screen click on YES to continue. Once in Expert Mode click on the Configure button located on the topClick on the "Advanced" link on the left side of the page, and it will take you to the advanced configuration menu. Then click on Pinholes right under NAT. A list of the current pinholes appear, to add a new Pinhole, click on the Add button After filling out all the information, you can click Submit to store the configuration, and proceed to add more pinholes. Once the process is completed you have to click on the yellow Warning icon that appears on the top right, and then click on Save and Restart in order to Save your configuration. If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

YOUR NETOPIA IS NOT COMPATIBLE WITH WIN98

CALL ATT

SO YOU MUST KNOW THE PASSWORD OR NO?

"Try http://www.fixya.com/support/r11153882-general_routers_reseting"

Reset the wireless by pushing and holding the RESET button, this will reset to default settings. Then you can reconfigure the SSID and Security. Take a look at this: http://www.routerpasswords.com/

If you reset the wireless device you can change the SSID and security code.

OK, do you have a question?

You don't need the cd. Just go to http://192.168.1.254 to configure the modem. This is from http://www.motorola.com/web/Home/Products/Voice-and-Data-CPE/xDSL-Modems-IADS-and-Gateways/2247-N8_Netopia/_Documents/StaticFiles/Netopia_2247-N8=_User_Manual.PDF?pLibItem=1

There is no security on a wireless receiver. Security is set on the wireless Access Point or router. Check your router documentation or talk to the person who manages the wireless network you want to connect to.If I misunderstand your question please let me know and we take it form there.

What is a "prone"? Maybe this will help: http://www.broadbandreports.com/forum/r24696308-Modem-How-to-Setup-Netopia-3347NWG006

You reset the router. that means router is set on factory default.settings has been changed now that's why connection manager is not responding properly. Now you have the run setup CD and set the router again.

You shouldn't need drivers or software to access the router. Type the IP address into you web browser and you should be able to access any setting for it. My suggestions would be to talk to your provider and see if they have a newer model. That is long since a discontinued item online.

Start up the computer using the original operating system installation disk. Re-install all the drivers, and programs. VERY IMPORTANT to install a quality virus scanner. The paid ones such as McAfee or Symantec, or the equivalent are strongly recommended. The free ones are not usually well supported and they will not guarantee up to date tables. DO NOT install hacked, or pirate, or software hacks, Most of these carry Trojans. That is their catch. Take care of the web sites that are visited. Use common sense to keep the computer clean. There are some worms and viruses that can do permanent hardware damage. If this has happened to your computer, service will be required. Jerry G.

Click on this WEB site to check if your computer is infected with the DNS changer.http://www.dns-ok.gov.au/

-Make sure your connected to your router.-check if you have static IP on your PC/laptop, if so set it to DHCPcheck your default gateway, by performing a dos command - ipconfig

Try Password: admin, 1234, serial number of unit (written underneath)Or you could connect to it with a Ethernet Cable and open web browser and go to 192.168.1.1 or 192.168.1.0 or 192.168.1.254 and you can access settings from there and change WEP password. Last resort, just use the reset button on the unit.

dannagare842, go to filehippo.com get free facebook block or do what I did and use same .com get spamfighter and put it in spam folder, it's blocked and free!Joe Don

"Try http://www.fixya.com/support/r11153882-general_routers_reseting"

"Try http://www.fixya.com/support/r11153882-general_routers_reseting"