Netopia Computers & Internet - Page 9 - Recent Questions, Troubleshooting & Support
How can I tell whether my R6100 router is working?
Your router has several light on the front that indicate what the current status of your connection is. Make sure to check your manual to see what your router is trying to tell you.
As far as the splitter or router issues are concerned: you should use a splitter on an ADSL connection. You won't really need one if you don't have a telephone line, but it's best to use one. Also, don't forget you can also try to hook up your router to a friend's connection and see if you're getting issues with that router on a different line as well.
If you're still clueless after this, don't forget that most ISP's won't charge you if there does happen to be a problem with your telephone line. Make sure you check your ISP's policy regarding that.
Need driver for windows 7 64bit
Assuming that you have upgraded from winxp and have the original cd with the software do the following:
1. go to the folder containing the usb or card files
2. copy all the files from the disk into a folder on your desktop
3. right click on the setup file in the folder on the desktop for usb or card
4. click properties
5. click compatibility tab
6. check the box under privilege level to run the program as an administrator
7. check the box under compatibility mode and select compatibility mode windows xp service pack 2
8. click apply and ok
9. double click the setup file
10. you should be able to install the program now
11. after install, reboot
12. click on the wireless icon in your system tray
13. select the network you want to connect to
14. enter security key
15. you should be able to connect to the internet now
I cant get it to
Assuming that you have upgraded from winxp and have the original cd with the software do the following:
1. go to the folder containing the usb or card files
2. copy all the files from the disk into a folder on your desktop
3. right click on the setup file in the folder on the desktop for usb or card
4. click properties
5. click compatibility tab
6. check the box under privilege level to run the program as an administrator
7. check the box under compatibility mode and select compatibility mode windows xp service pack 2
8. click apply and ok
9. double click the setup file
10. you should be able to install the program now
11. after install, reboot
12. click on the wireless icon in your system tray
13. select the network you want to connect to
14. enter security key
15. you should be able to connect to the internet now
Windows seven drivers are needed.
Assuming that you have upgraded from winxp and have the original cd with the software do the following:
1. go to the folder containing the usb or card files
2. copy all the files from the disk into a folder on your desktop
3. right click on the setup file in the folder on the desktop for usb or card
4. click properties
5. click compatibility tab
6. check the box under privilege level to run the program as an administrator
7. check the box under compatibility mode and select compatibility mode windows xp service pack 2
8. click apply and ok
9. double click the setup file
10. you should be able to install the program now
11. after install, reboot
12. click on the wireless icon in your system tray
13. select the network you want to connect to
14. enter security key
15. you should be able to connect to the internet now
We have a Netopia USB
Not sure this works, but here is a web address for a driver for Vista. Sometimes these work in win7.
http://www.wireless-driver.com/motorola-netopia-tergusb-n1-windows-drivers/
The cd installation doesn't run automatically how
go to START>(MY) COMPUTER> and right-click on the cd drive-- choose properties and Autoplay options-- or if your just trying to run a cd just double-click the drive or right click and choose open
I have a new Netopia
Take the new router back to where you bought it and get a different router. There is a problem with this router.
3/3/2011 5:45:16 AM •
Netopia...
•
Answered
on Mar 03, 2011
Good day!
I have try to
hello arthur, you wont need the eircom firmware you just need a firmware update for the netopia 2247nwg-vgx
go here fill out the details and download the firmware and update the router with it
http://www.netopia.com/support/hardware/firmware/updates.html?224xw
2/27/2011 7:58:42 PM •
Netopia...
•
Answered
on Feb 27, 2011
Need help to reinstall my netopia 3d reach adpater
i dont know what iperating sytem u use i dont know what os it is so here try all of these one definately works follow the link and look carefully you will see it about 3 quarters of the way down there are the drivers for xp and others there
http://fastaccess.drivers.bellsouth.net/archive.html#caymanthese drivers are really hard to find please give me the best testimonial you can this took up alot of my time
just copy the driver to the flash drive and you are done or just install straight from the net
Good day i reset my
In order to get your router back to the original settings, you must push
in the reset button (usually on the back of the router) for somewhere
between 10 and 30 seconds depending on the router. You may need a pin or
something small to push in the button, because it can be recessed. Once
you have reset the router, the username and password will be changed to
the defaults, admin and password, respectively. One thing you must
remember is that resetting the router will change all of the router
settings back to the factory settings. This means you will lose all of
the changes you made since you got the router. Make sure to write down
any things you've changed, so you can change them back after the reset.
Also, I recommend updating to the latest firmware after the reset.
If you need more help post back!
Thumbs and testimonial are welcome!
2/24/2011 7:33:38 AM •
Netopia...
•
Answered
on Feb 24, 2011
AT&T tells me that I
Not true. Any wireless b/g adapter will work -- and that's only if you need wireless, i.e., the router has 6 or 7 wired ports, also.
Further, I'm having a problem finding software that'll work with the Netopia device under Ubuntu (that's what I'm doing here :-)
My nat setting is set
Well if your trying to set nat type for Black Ops Moderate is about the best you can get while in the game, I get open once in a while majority of the time it is moderate. But here is how you get the best possible connection. 1st enter your router usually 192.168.2.1 or 192.168.1.1 What you want to do is get your router information, DNS, Default Gateway, and Route Address.// Now you go into your gaming system and go to internet connection setup. You will want to give your System a static IP usually something along the lines of 192.168.2.160 or 192.168.1.160 notice the possition of the 2 or the 1 depending on your router IP if its a 1 use 1 if its a 2 use a 2.// Enter all the information from the router to the gaming system. Now 1 more step before you go online go into your routers gaming and applications setup go to DMZ and whatever IP you gave your system make sure you put the same in the DMZ of the router. now what you want to do is restart the router so it takes the changes once you save it. Now restart your machine as well once you have it all saved and bring it all back up.. Happy Gaming and hope this helps you out.
2/10/2011 7:35:31 AM •
Netopia...
•
Answered
on Feb 10, 2011
I'm trying to find the
Hi,
Welcome to Fixya. If you want to obtain the Wep Key or Network Key on your router you need to access the Wireless Settings Page. To access the router page you need a working computer that is connected to the router. To access the router page just open a browser then type 192.168.1.1. Go to the Wireless Settings Page you will see there Network Key or Passphrase. The Network Key serves as a password or security code on your network to make it secure.
Thanks for using Fixya.
2/6/2011 3:25:08 PM •
Netopia...
•
Answered
on Feb 06, 2011
How do I get xbox
Do you mean a wireless adaptor or the router ?
The router will work but the adaptor will not.
If it is the ROUTER then if you wish to give me the specific model i will dig out those steps needed.
Again if it is just a netopia wireless adaptor then that is a NO-GO
2/4/2011 5:04:59 AM •
Netopia...
•
Answered
on Feb 04, 2011
Not finding what you are looking for?