There is a flashing arrow next to "event" and when
I can't be sure without going outside (it's raining) and checking my own controller, but I'm thinkin' that the arrow pointing to "even" indicates that the program will only water on even numbered days. Can you change it so it points to event and "All"?
I have a nelson EZ
It sounds like you have a double program in your system. Suggest you take the battery out for several minutes and then reprogram it. Depending on how many zones you are running, I would shuggest you use the A zone and not do anything to the B and C zones.
Water leaks from back of sprinkler where it fits
Hi,
Right where the hose sacrews in there should be a plastic or rubber washer that seals the hose connection.
You probably have lost this washer. You can easily get a replacement from a hardware, Lowes, HD, or similar store...
heatman101
8/16/2013 4:59:23 AM •
Nelson...
•
Answered
on Aug 16, 2013
My lawn sprinkler a K-Rain Cyclematic Distributing
The internal disk-shaped rubber valve mechanism is failing to rotate. With the water shutoff (mine has no pressure when the controller is set to "off") remove the eight stainless screws on the top, tap it loose, and lift off. You'll see the black rubber disk I am talking about. Pull it out and use wet/dry sandpaper to smooth the inside wall of the aluminum housing it sits in. Mine builds up some roughness from corrosion, which drags on the disk and prevents its rotation.
12/5/2012 10:06:32 PM •
Nelson...
•
Answered
on Dec 05, 2012
Not finding what you are looking for?