Necchi Logo

Necchi Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 15 Products
  • 1K Answers

there should be a place to adjust the "feed dogs" on your machine. They should be able to be raised or lowered to give you proper to get the pressure of the pressure foot where you want it.

Necchi 4575... | Answered on Aug 05, 2017

lower your needle

Necchi Sewing... | Answered on Aug 05, 2017

Try Googling (Necchi)(kp893)(manual) without parens.

Necchi Sewing... | Answered on Jul 24, 2017

Not finding one for your particular machine. You might try contacting:
since they sold the model.

Necchi KP 893 Sewing Machine

How to Thread Necchi Sewing Machine

How to thread necchi sewing machine eHow UK

Necchi Sewing... | Answered on Jul 24, 2017

It could be possible there is thread, lint, other debris that has become wound into the machine's inner workings. Opening the machine and looking for things that don't belong and then carefully removing them may solve the problem. Also recommend refraining from running the machine's motor while the machine is locked to prevent damaging the motor. A better suggestion is taking your machine for service. It could very well benefit from a general overall checkup, cleaning, oiling, and adjustment.

Necchi Sewing... | Answered on Jul 13, 2017

Try the Necchi Yahoo Group. There are members who often sell parts and they also are very knowledgeable and helpful.. You should also try eBay. They have parts for lots of vintage machines. You may not find what you are looking for right away but look often as things show up everyday.

Necchi 4595... | Answered on Jul 11, 2017

Try Googling (necchi)(887FA)(manual) without parens.

Necchi Sewing... | Answered on Jul 04, 2017

A mechanical machine? How long since it's been thoroughly cleaned and oiled? Sounds like the machine is seizing due to old oil that has dried.

Wheel on right side that controls the needle up and down is very tight...


Necchi Sewing... | Answered on Jun 25, 2017

Try Googling (necchi)(300)(manual) without parens.

Necchi Sewing... | Answered on Jun 22, 2017

Try Googling (necchi)(S-3010)(manual) without parens.

Necchi Sewing... | Answered on Jun 21, 2017

It is likely that you need to open up the bobbin area and remove the parts to clean out all debris. The feed dogs should also be thoroughly cleaned. Try to remove the needle prior to doing this. When you have removed all of the parts from the bobbin area you will notice the hand wheel can now be rotated. Check all of this and make sure that the race is oiled with one drop of sewing machine oil. (small area that the bobbin case sits on - lower and looks like a car race area) Go ahead and blow out everything with canned air. Oil all moving areas with oil while it is open.

Necchi Sewing... | Answered on May 29, 2017

You should take it for service. It could be slightly out of time.

Necchi 6011 | Answered on May 26, 2017

Yep, It is called bird nesting or thread nesting. The number one reason is that the top thread is not seated completely in the top tension disk.

Install a brand new needle.
Remove the top thread from the machine.
ALWAYS RAISE the presser foot and rethread from the beginning. Confirm the thread path is correct.
Now recheck your machine stitching.

Remember if the thread issue shows under the fabric, it is a top thread problem. If the thread issue shows on top of the fabric, it is a bobbin problem.

If the top thread still shows on the underside of the fabric, you may need to tighten the top thread so it will pull the bobbin thread up.

What causes Bird Nests Superior Threads

Sewing Machine Thread Bunching Up Here Why

Necchi Sewing... | Answered on May 25, 2017

This will help you determine which presser foot shank you need for your machine. Once you know which shank fits your machine, you can purchase extra presser feet most anywhere:

User Guide Instructions Book Operating Manual Service manual Workshop...

As for a replacement spool pin, you can probably take your machine to a sewing machine repair shop and they can fix it for you.

Necchi Sewing... | Answered on May 10, 2017

talk with any sewing machine repair shop as the screw will be generic

Necchi Sewing... | Answered on May 09, 2017


... the first link seems to be charging about $15 for the manual ... here it is

However, this second link seems to be free ...


I’m happy to assist further over the phone at

Necchi Sewing... | Answered on May 04, 2017

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Necchi Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

212 Answers

Irene Tulloch

Level 2 Expert

491 Answers

Are you a Necchi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides