Necchi Logo

Necchi Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 15 Products
  • 1K Answers
  • 52K Views

That's the presser foot and it is made to be removed so you use other presser feet for certain functions.

The owner's manual should have instructions on how to remove and install a presser foot,.

http://www.ifixmachines.com/index.php/product/1620-necchi-sewing-machine-3102-fb-manual


How To Change The Presser Foot of Sewing Machine


...

Necchi 3102... | Answered on Mar 03, 2018


perhaps the hand wheel clutch need tightened .

Necchi Sewing... | Answered on Mar 03, 2018


I tried locating a manual for your machine but was unsuccessful. Most serger cutting blades can be disengaged by pressing it to the right and then flipping up. Otherwise, I can't offer any other ideas. However, if you want to stitch without using the cutting blade engaged, it is not a good idea. The cutting blade prevents excess fabric from flopping over into the loopers and can cause them to be damaged or broken.

Necchi Sewing... | Answered on Feb 27, 2018


This may be helpful. Most machines thread similarly.

How to Thread Necchi Sewing Machine

or you can search for:
Make Model manual

and get a manual for your machine. I didn't find any free, but $7 or $10 isn't a bad price.,

Necchi Sewing... | Answered on Feb 23, 2018


Try a brand new needle. If that doesn't work, then the machine is probably out of time. Search for sewing machine timing or take it for service.

Necchi Sewing... | Answered on Feb 19, 2018


Search for:

Make Model manual

you may be lucky to find one online.

Necchi Sewing... | Answered on Feb 14, 2018


Needle threaders are generally finicky things. Check to make sure the needle eye is at the correct height for the threader to connect. Gently pull down the threader and wiggle the handwheel slightly to get the needle eye where it needs to be. The threader may have been been bent or slightly rotated so it doesn't connect properly. Also, if you are not aware, a needle threader will usually not work on needles smaller than 80/12 because the eyes are too small.

Admittedly, a needle threader is a very nice function to have. If you find it will not work, there are some things you can do to make manual threading easier. One hint I found that works well is to lick your finger. Swipe it across the back of the needle eye. Then begin with the thread end immediately above the needle eye and gently slide it down to the eye. The needle usually has a tiny groove above the eye that helps guide the thread. The thread tends to jump right through.

...

Necchi 3620... | Answered on Feb 13, 2018


When you put the bobbin on the winding pin, you need to push the bobbin toward the other round pin next to it. That activates the bobbin winder. If you look closely at the picture in the manual, there is an arrow showing to push the bobbin over.

Necchi Sewing... | Answered on Feb 13, 2018


Dad taught me to service machines when I was about 12. Back then, foot pedals ran on small discs of carbon, and he gave me lots, to service My foot pedal. That was circa 1960. Likely you need a replacement foot pedal. I would look for one on Ebay. Just - where I find all sorts of 'Stuff'.

Necchi Sewing... | Answered on Feb 13, 2018


Look it up, online.

Necchi Sewing... | Answered on Feb 12, 2018


I HOPE this problem was resolved months ago. There is an electrical 'short' in her Necchi. A replacement pedal should fix it.

Necchi Sewing... | Answered on Feb 12, 2018


You can find one, online.

Necchi Sewing... | Answered on Feb 12, 2018


Oops! All sewing machine diagrams/manuals are available, online. Oddly. From the late 1800's, on.

Necchi Sewing... | Answered on Feb 12, 2018


The older, the better! I bought a Necchi in 1973. Amazing machine! For decades, I didn't even know it was a Necchi! There are 'plates' all over my machine, that tell me it's model number. Mine is a free-arm. LIkely, yours is older. Look on the right side, or the back. They proudly announce the information you are looking for!

Necchi Sewing... | Answered on Feb 12, 2018


Look for it's manual, online.

Necchi Sewing... | Answered on Feb 12, 2018


Back when the internet was first made 'Free" by it's inventors, a friend purchased a machine, made it the late 19th century, with a horizontal bobbin. She found it's manual, online! Ergo, you can find your Necchi's manual online!

Necchi Sewing... | Answered on Feb 12, 2018


On my Necchi, it is always on. Just need to switch the lamp on, behind the left face plate. Not familiar with anything less than 45 years old. You can find a manual for Any sewing machine, online.

Necchi Sewing... | Answered on Feb 12, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Necchi Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

212 Answers

Irene Tulloch

Level 2 Expert

491 Answers

Are you a Necchi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...