NEC Televison & Video - Recent Questions, Troubleshooting & Support

Help in the link https://www.google.com/search?q=NEC+NP901W+projecting+vertical+red+lines ..

You can purchase a tv stand from Amazon or your local Walmart I believe they have them in stock.

No. There is no other way to get it to its factory reset; without entering its service mode. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. http://electronicshelponline.blogspot.com/ Pull up older posts. Service mode entry, adjust and exit procedure to many popular brand TVs are given.

andrew answered this yesterday and someone deleted it. its to keep the tape from freespooling

on your remote down on the left hand side at the bottom of it its the second last button called c.lock its right above easy rpt press n hold till the little red key flashes and disapears off your unit !

Try going to the NEC website and download a user manual >>> http://www.generalmanual.com/Televisions/NEC-NLT-32XT1-LCD-Television.htm <<< That would I think, have the instructions about doing just that. Regards Geoff

Depends on the model!

here you go https://www.manualslib.com/manual/833214/Nec-Pxt-42xd2.html#product-PXT-42XD2

is it r,w,y on top of each other? choose one and see if functions 1 may say in oter out

Does the VCR have Component outputs( Red/White?Yellow)? If yes use AV1 to connect them

Hi! with this faulty , defective, LEDs in the matrix

How many times this standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/. If the blinks continues, and non-stop, the fault should be with its main system control IC, and with the memory IC.

The teletext button on the remote control handset, has usually a toggle action. One press for on and another press for off.
Hope that helps.

press disp+vsm together here it opens service menu at last of that menu there is restore option press 1 to INT . press 1 and your tv will restore.

If you have an HDMI cable you may be able to hook it up that way. If not try a audio video cord if your box has either of those it should work.