NEC Computers & Internet - Page 2 - Answered Questions & Fixed Issues
How to make wifi extender through nec atren wm3500r in home wifi?
Firstly, check for reset button on your WiFi extender, press and hold for few seconds till all lights off.
Search for WiFi SSID and connect your laptop or mobile, browse for given ip on extender in browser, give it's password and follow the wizard to complete setup.
Connect to a Windows Terminal Server
Yes. You need to install the RDP client software which can be downloaded from Microsoft.
Procedure to install the RDP client on a MobilePro 880:
Note: Steps 1 and 2 need to completed if you have not installed the Service Pack One for MobilePro 780 and 880.
1. Perform a "Hard" reset on the MobilePro 880.
2. Install NEC Service Pack 1: http://support.neccomp.com/kbtools/faq/mobilepro/mp1.asp
3. Make sure the Device Name is set to something other than "Handheld PC".
1. Start-Setting-Control Panel-Communications
2. Change Device Name to a Unique Name that is not currently being used on your
network.
4. Establish a Partnership with a Host using active sync.
5. Disconnect the MobilePro from the host.
6. Install "hpcrdp.exe" on your host. It can be down loaded from Microsoft:
1. Go to http://www.microsoft.com
2. Select "Search microsoft.com" under the Search tab.
3. Type "hpcrdp" in the search box and depress Enter.
4. Look for the search results titled "Terminal Server Download for Windows CE".
5. Double click on the article and follow the link and at bottom of the Terminal Server License agreement you will find the link to bring down the RDP client.
7. Establish an Active Sync connection between the host and MobilePro 880.
8. The RDP client software will be installed on the Mobile device.
9. Install a NE2000 NIC (or any NIC that you have the MIPS CE drivers for) into the Mobile Pro 880.
10. Set up network and attach to your existing network.
11. Set up a RDP session:
1. Start-Programs-TerminalServerClient-Client Connection Wizard
2. Enter Description connection.
3. Server Name or IP address.
4. Next
5. Enter user name, password and domain if you want to logon automatically.
6. Next
7. Finish
If your terminal server is set up correctly you should be able to connect as a Client.
NEC 300 name display
Maybe a space between the name is not allowed. If you press the space bar then it's not allowed if nothing happens. Try using an underscore then the name would look like this: FirstName_LastName
I was given an old
That monitor can receive a VGA signal from a device, usually a computer. That's about it.
I dropped my monitor, right on a concrete floor
Hi Rshevlin,
There could be a lot of random parts that could have been jarred or damaged internally with your CRT monitor. It was already fortunate that you didn't break the glass screen, but as you said already with your post it didn't come out unscathed (green and red area on the screen).
I strongly suggest that you have a technician check out the monitor and see which part if any got damage or jarred inside your monitor.
I also won't recommend opening your CRT monitor with the high voltage inside it. You may run the risk of getting electrocuted.
Hope this helps you.
Inputing video to 1740cx-bk
Yes, you should be able to simply plug it in. It is best to follow standards - such as if your unit uses Red, blue, green, white, and red outlets, use that type of cable to hook up to your TV. If your player uses yellow, white, and red, use that type of cable. The colors don't really matter, but it is much easier to troubleshoot later on if you follow standards.
1/16/2018 2:39:26 PM •
NEC AccuSync...
•
Answered
on Jan 16, 2018
•
131 views
Intermittent display problem, NEC Multisync 1760NX
This usually happens when the resolution is set incorrectly for the monitor. If you have been using the same setup, probably an update changed the driver or setting for the video card. If it is a new monitor, try hooking up the old one and change the resolution to something the new monitor can understand. If you have been using it for some time and this is all of a sudden, then try to borrow a monitor and change the resolution to something the monitor can understand. If you borrow one and can get it working, also look and make sure the video card has a driver installed. Sometimes an update can change things.
12/21/2017 11:27:22 PM •
NEC MultiSync...
•
Answered
on Dec 21, 2017
•
194 views
Input video to nec 1740cx-bk lcd monitor
If you are trying to use a computer monitor to watch a DVD, you probably won't have much success unless your monitor accepts the RCA plug. I have found the VGA adapters to RCA plugs will not work in this manner.
12/1/2017 3:34:53 PM •
NEC AccuSync...
•
Answered
on Dec 01, 2017
•
114 views
How would i find this
get the manufacturer of the speakers to be connected
go on that web page , find a download suitable for that model and also suitable for the win operating system you have
download then run the download
see if that works
I have a NEC DVD/RW ND-3550A, which worked great
Sometimes this kind of problem dissappears after you update the firmware of the drive. Goto NEC support page online and search for firmware update for your make and model. There will be a little program to flash yhe firmware from your computer.
Good luck trying!!
A.Misset
Voltage/polarity of power supply for NEC pcmcia 4 port USB2 card
If you KNOW it is 5 volts then you only need to make sure that the amp is higher and never lower. Higher amp only means it can work without getting too hot. But the VOLTS MUST BE precise. For polarity it is MOST common to have the center pin PLUS and outer NEG/GND. When I fix laptops and put the powercord wrong nothing happens. When I get it right then lights go on on PC.
Not finding what you are looking for?