NEC AccuSync - Popular Questions, Answers, Tips & Manuals

Yes, you should be able to simply plug it in. It is best to follow standards - such as if your unit uses Red, blue, green, white, and red outlets, use that type of cable to hook up to your TV. If your player uses yellow, white, and red, use that type of cable. The colors don't really matter, but it is much easier to troubleshoot later on if you follow standards.

If you are trying to use a computer monitor to watch a DVD, you probably won't have much success unless your monitor accepts the RCA plug. I have found the VGA adapters to RCA plugs will not work in this manner.

What is the problem? Did you try plugging it into another working computer?

Hello, This is normally caused when the monitor does not support the screen resolution the computer is set to. Change the screen resolution and see if that helps. Also, consider updating your graphics driver too. Hope this helps Steve EmoticonIT com Computer Solutions Lincolnshire Joomla Websites IT...

Does the touch screen work?

If you tilt the monitor away from you with it on, you should still be able to see the "shadow" images of whatever is being displayed, even though the lamp doesn't work. I would just replace the lamp and it should work fine, as long as you can tell that the monitor itself is getting power...

open your monitor in on condition and see which component geting hot ok change component with new one and check it aain

I found a little trick about this problem...i had the same issue and the only thing that really helped me was.. •Go to "Control Panel" •Select the "Adjust screen resolution" •Now you have just to drop your Resolution BUT you have to do the trick here... When you will press the Apply for the low Resolution in the same time while pressing the OK/Apply you have to push the button "SELECT" in your screen Notice: Rember you have to do it in same time! Greetings Bill!

your computer is infected by virus, you can repair it by system restore, boot your computer to save mode by pressing f8 continously on system start up, select safe mode after it is start you will be prompt by notice on what you want to do select the option for system restore then select for a previous date for restoring.

Windows 7 & Vista:
Right Click on your desktop and go to Personalization. Click on Desktop Background at the Bottom of the screen. On the Picture Position drop down menu, click Stretch and save changes.

Windows XP:
Right Click on the Desktop and click Properties. Go to the Desktop Tab. Select stretch from the drop down menu. Apply.

Please Rate my answer. Thank you.

It will be the inverter module or the the back light that is the problem, but until you take it apart and examine the parts and do some testing that will be the key in finding the culprit.

This usually means the red or green or both primary color module is bad. Monitors come with 3 primary color module controllers and they use them in various combinations to make the other colors. The primary colors are blue, green, and red.