NEC AccuSync - Recent Questions, Troubleshooting & Support - Page 6

Plz help me how to download
Wireless driver LS150/E Lavie
Windows 7 64bit

Maybe a space between the name is not allowed. If you press the space bar then it's not allowed if nothing happens. Try using an underscore then the name would look like this: FirstName_LastName

sounds like power board failure. You can disconect power lead for 30 minutes and try again but it does sound like end of life

IF the layout, top row keys from left to right do not start with qwertyuiop etc. you have a foreign keyboard.

That monitor can receive a VGA signal from a device, usually a computer. That's about it.

Hi Rshevlin, There could be a lot of random parts that could have been jarred or damaged internally with your CRT monitor. It was already fortunate that you didn't break the glass screen, but as you said already with your post it didn't come out unscathed (green and red area on the screen). I strongly suggest that you have a technician check out the monitor and see which part if any got damage or jarred inside your monitor. I also won't recommend opening your CRT monitor with the high voltage inside it. You may run the risk of getting electrocuted. Hope this helps you.

Look at the manual for problem solving tips. If there are no available suggestions, contact technical assistance either by phone or on line for assistance.

This usually happens when the resolution is set incorrectly for the monitor. If you have been using the same setup, probably an update changed the driver or setting for the video card. If it is a new monitor, try hooking up the old one and change the resolution to something the new monitor can understand. If you have been using it for some time and this is all of a sudden, then try to borrow a monitor and change the resolution to something the monitor can understand. If you borrow one and can get it working, also look and make sure the video card has a driver installed. Sometimes an update can change things.