Problems with naxa 4GB MP3
for some reason whenever I plug in my naxa 4gig as soon as it starts charging the sync arrow shows up... with nothing syncing. it's really starting to bother me as the battery can't fully charge because of it
How to set the clock on the car stereo (Naxa nx-670)
I had the same issue. I bought my 671
mp3 car stereo from jujudeals.com and I was having the same problem. I called them up and they said that I have to go to clock mode. When in 'Clock Mode' you have to press and hold Select (SEL) and at the same time press FF/REV to adjust time. (Fast Forward adjusts hour, Rewind adjusts minute). If your still having problems contact the
Naxa Electronics warranty department. Goodluck!
When I turn my tv on the picture comes on anywhere from 3 to 10 seconds and then goes off I still have sound just no picture
I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all these sets the troubleshooting involves
checking voltages on the main power board to narrow down theproblem.4. Be safe and if you do not know what you are doing don't open the set.Answers to issues:1. RE:fuses---if a blown fuse is found get a good replacement(not the genericones like Radio Shack). Many fuses are special even aside from amperage--Don'tput a higher rated amperage fuse in the set for any reason.2. RE: power supply in set: if total dead aside from main fuse the set uses astandby power supply that runs 7/24 and a main supply (some are combined andsome not.Here aside from checking fuses you want to examine all the filter caps on thepower/standby to see if any are puffed up or buldged up in some fashion--Iattach a photo of a good one---top should be silver metal and PERFECTLY flatand have no brown material coming out on top or bottom.What happens in the standby area is they use caps with too low a voltage rating(saves money) which causes them to fail in a year or two---the standby runs7/24 and the heat dries out the caps and they fail.3. Trouble shooting consists of the above and then at some point you have to buyand try a board to see if it fixes it or not.4. Safety first--no TV set is worth getting injured or even killed over.If set is opened at least look for puffed up and bad caps like in thisphoto.
My naxa nca-675 was working
I would recommend disconnecting your battery and see if that helps. As far as the owner's manual, it is worthless by far. It does recommend however, to press the reset button but does not clearly specify how to accomplish that.
I have a naxa nmv-155
push the reset button on the side with a paperclip and hold it in for 30 seconds. hope this helps
When i put on the
Mine is doing the exact same thing just bought it brand new a week ago I hope some one solve this
Not finding what you are looking for?
