My navman 7100 vhf radio
Too late to help op, but trying to fix one with same symptoms, found a broken wire in the microphone cable near the handset, as I'd suspected. The cable appears to be a curly shielded 8 conductor, one of which (presumably the mike) appears to also have a shield - found a seller on ebay US that appears a suitable cable for about £16
7/16/2011 3:49:09 PM •
Navman GPS
•
504 views • 0 helpful votes
When the Navman is connected to the power in the
Hi there,
It seem that there is a problem with the power supply board of your device. Try opening the unit up and check if you can replace the fuse and using a power tester check the wires for continuity.
You can also look for swelled capacitors and solder new ones to replace them.
You may want to consider how much the repair would cost and how much a new one is as most of the time adding a few dollars to the cost of the repair would have you a new GPS device.
Hope this helps!
I purchased a Navman MY50T
yes you need to replace the batt the reason for burn out so fast can be a number of things from moister getting into it during storage to simply bad line assembley
Dowonload manual
Here it is:
http://www.prscomms.com/Manuals/Navman/5500_5100_eng_web.pdf
I have got a new
I own a Navman MY55T and I honestly don't think you have to reset date and time. I never have for mine.
I have had a look online for you for your model of Navman and could not find anything within the user manual except how to change the format display for day/month/yer or month/day/year.
My only thoughts Sync it with your computer and it may pick up your computers time and date like many other peripherals do when they sync to your computer. Or it may well automatically change when it picks up GPS info as you use it in your car.
6/8/2011 9:29:26 AM •
Navman GPS
•
587 views • 2 helpful votes
I have purchased new Australian
Hi,
For your information NAVTEQ is the leading provider of
map data for GPS devices and all new Navman units have a NAVTEQ map at its
core.
NAVTEQ maps provide a highly accurate representation of
the detailed road network including up to 260 attributes like turn
restrictions, physical barriers and gates, one-way streets, restricted access
and relative road heights
For your problem first update the NAVTEQ digital maps.
This is easy updatable software. Better if you can format this device and
reload the software and maps with all updates. Because this is the problem of
software corruption or malfunction. You may need to update the firmware also for
the device. It will solve your problem.
8/16/2011 6:36:15 AM •
Navman GPS
•
87 views • 0 helpful votes
My navman 5505i screen goes
Hello
The display driver IC inside the unit is faulty. The fault is internal to IC so cannot be rectified. It should be replaced along with the display as both are one integrated unit. When heats up, the problem arises and it will not be predictabe when it will arise. The company detected the fault, that is why they asked to buy a new one. The repair charge along with the component price will come around the price of a new one ofcourse. OK.
Not finding what you are looking for?