My Trimline treadmill 1050.E2 is showing an 'E2'
Hello all,
I have the same issue - it Shows "E2" on the time Display...
I already checked the Speed sensor and inclination potentiometer and both are OK... Moreover, I found that EEPROM Memory (Microchip 93LC46) is broken (reads "00"). After replacing it, I Need a way to reset / recalibrate the treadmill. I found on some Forums that there shall be a key combination (Speed+ & Start / Stop or similar) but None works for me. Could you please (if available) post the User Manual page describing the calibration entry? Or, maybe, advice a way to calibrate the 1050? Even the EEPROM Content (I guess the it is an issue) will be really helpful. Thank you in advance,
Milos
12/11/2015 7:56:59 AM •
Nautilus...
•
Answered
on Dec 11, 2015
•
1,624 views
Need to lubricate the bell of my treadmill . how i
you will need silicone lubricant with an applicator wand and all you have to do is lift the belt up enough to get the applicator wand under and spread the treadmill silicone on the machine - be very careful that you do not use any other silicone except what is made for treadmills. My company sells this product for $18.95 and it usually will last 1-2 years with proper lubrication
5/28/2015 10:26:24 AM •
Nautilus...
•
Answered
on May 28, 2015
•
478 views
Not finding what you are looking for?