Motorola Mobility Radio Communications - Answered Questions & Fixed Issues

It won't charge

I searched on google for motorola h700 and found plenty of sources? Amazon.com and others.

The S10-HD Headset battery cannot be replaced. Mark Motorola Support

this video will help u in dis

Hi,
If you have lost the pairing on your phone with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’.
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone

Hope this helps

Hi,

follow the steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’
7) If successful then the headset will start flashing BLUE every few seconds.
• The headset is now paired with the phone

Hope this helps
Season's Greetings from Fixya!

Chris (ziraffa)

No. Most mono Bluetooth headsets cannot play music. You need a stereo bluetooth headset or a wired headset. Mark Motorola Support

It's a little fiddly getting cover off as you need to gently pry the cover from the connector end, once the cover is off there is silicone over the solder connections that will need to be gently scrapped off. The old battery has sticky tape holding it down, carefully pry that up slowly, don't dent the battery or deform as it could short and melt or catch fire. but since your changing it, it's prolly already dead, but don't assume. After the battery is off the case then un-solder the connections and resolder the replacement battery. Check ebay for replacement Motorola Bluetooth batteries. any of 3.7 volt 90mah. Size: 6mm(H) x 12mm(W) x 20mm(L)

Hi Madhav,

Thank you for your question at Fixya,

The solution to your problem is as follows :-

• The blue tooth connection depends on the fact as to whether or not the bluetooth handsfree that you have is compatible with your phone or not , a good idea would be to check it before you buy one.
• Now if you want to connect your bluetooth handsfree to your mobile , you need to first make sure that your phone's bluetooth connection has been switch on and then it's not hidden and it should be in shown to all mode as this is a nokia phone.
• When you switch on the bluetooth connection in your phone , then you need to switch on your bluetooth handsfree and then keep it on.
• Then again you need to go back in the bluetooth option and then select search for paired devices option or new paired device option , then the phone will search for available bluetooth connections.
• If it detects your bluetooth , please accept that connection and then it will ask you for a pass code , which you have to enter as 0000 and then press ok.
• That's it! you will have your phone successfully connected to your bluetooth handsfree.

Hope that helps ...:) In case you have any queries, feel free to contact me.

https://motorola-global-en-aus.custhelp.com/ci/fattach/get/450121/1340461979/redirect/1/session/L2F2LzEvdGltZS8xNTIxMzI4NjU0L3NpZC9LTEM0elRIbg==/filename/HT820_Headset_QuickStartGuide.pdf

Click https://motorola-global-en-aus.custhelp.com/ci/fattach/get/450121/1340461979/redirect/1/session/L2F2LzEvdGltZS8xNTIxMzI4NjU0L3NpZC9LTEM0elRIbg==/filename/HT820_Headset_QuickStartGuide.pdf

First thing to do is make sure Bluetooth is on for BOTH devices . Second thing is to make Both devices Visible. Third is to Scan for nearby devices. You will need to know the 'device name' of each phone. When you find the other phone on one device, click on it & it should ask you to 'Pair device'. You should then hear an 'alarm' tone & get a message in a box. (sometimes you need to 'pull-down' this message from the top of the screen, like you do to get the settings or wi-fi status). It will ask you if you want to pair & then give you a 'Pairing code'. This is what you type into the phone. The other phone will then get this & ask if you want to pair. Say yes & the two phones are paired ONE WAY. You need to repeat the process for the phones the other way around, so that the phones are paired in both directions. Remember, every time you get the 'alarm' tone, to check your 'pull-down' to see if the connection code is hidden up there.! Telling it to you is more complicated than actually doing it.!!! Best of luck.

Is the headset in the discover mode? Usually its a 2 button press and hold until the led blinks or changes color.

Looks like a new driver for the speaker and microphone is needed or a software update. Click on: https://www.solvusoft.com/en/update/drivers/speaker/motorola/t325/sub-models/

hit the sound icon on your desktop rightclick it, go to Recoringtools turn down the microphone! As in the picture. Im sorry its dutch :-)

If the rest of the laptop works and you can still hear audio through the headphones. Buy and replace the speaker: https://en.accessoires-asus.com/?gclid=EAIaIQobChMI27rs6-ba2AIVDrvtCh0y-wwhEAAYASAAEgLRbvD_BwE If not it might be the power supply and that would explain the jolt and the red beam.

It can happen when phones update their software. It also can occur when the earset battery gets too old to hold the full charge.

Just google the instructions. Should get a pdf option to download ??

the default wifi passkey is usually printed on the label stuck to the router. you can login to the router using admin admin with a lan cable connected pc start a browser and enter 192.168.1.1 into a browser to get the menu up. you can then alter the wifi passkey value to whatever value you prefer. ALL Wifi signals have a PassKey by default so you must have entered it at some stage to the working devices.