Microsoft Televison & Video - Recent Questions, Troubleshooting & Support

you need a program called itools.It will enable you to do swapping of music.The cd prob is another issue.Your computer might be finalizing the cd,which doesn't allow any music to be added.

If you forgot the Windows login password and want to recover or reset Windows password, there is two methods to help you reset the Windows login password:Method 1: Use the password reset disk to recover the Windows password, by this methods, you need create a Windows password reset disk before you have lost or forgotten your Windows password.Method 2: Using Anmosoft Windows Password Reset to recover or reset Windows password, it support Windows all Windows versions like Windows 7, Vista, XP, 2000 and Windows Server 2008(R2), 2003(R2), 2000, etcAnmosoft Windows Password Reset software recover or reset Windows password by four steps:Step1: Download Anmosoft Windows Password Reset V8.0 and install it.(Download from here: http://www.resetwindowspassword.com).Step2: Burn the ISO image file onto a blank CD/DVD or USB.Step3: Boot up your Windows PC by the bootable burned CD/DVD or USB in minutes.Step4: Remove the forgotten Windows password on the operation interface and logon PC without password.

Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. In some cases, the remote control might need to clean. http://electronicshelponline.blogspot.com/ http://remotesearch.blogspot.com/ http://homenol.blogspot.com/ Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly. https://youtu.be/wUpnETSm6_k https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean] https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

Make sure that the monitor cable is fully inserted into computer receptacle. If all contacts are good, clean, and tight you may have to replace the monitor since repair is not cost effective.

Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience. In some cases, the remote control might need to clean. http://remotesearch.blogspot.com/ Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly. https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean] https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

Yes. It has.

What is the make and model of the pc?

Visit this site for more details. Type in the site name "Electro-help" either Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as electronics equipments' repair help.

http://mktplassets.xbox.com/NR/exeres/9D6DAB51-0211-454A-84D2-4D716C8A1E5F.htm
there all right there

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions IDE,SATA

the leads from your "((motherboard to your hard drive))" make sure they have a secure connection and are not faulty or just replace them there probably old and faulty

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error If your computer came with a motherboard disc the drivers could be on it or you might have a dirty graphics card remove the graphics card and clean the socket click start control panel,display,desktop you can select a different desktop from the drop down list or a browse button where you can select different pictures this may vary depending on your operating system

also settings you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal size larger size or custom settingsalways click APPLY after making any changesalso

Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers

if your computer came with a motherboard disc the drivers could be on it

cnetdownload.com on the home page you should see the download software finder under that there will be a list platform, category sub category price from the category drop down list select drivers then from the price drop down list select free or which ever applies to your need or major geeks download this graphics driver this will depend on your operating system

http://download.cnet.com/%7Bvalue=http://www.download.com/ati-catalyst-display-driver/3000-2108_4-10608736.html

This is a WHQL release from the Release 260 family of drivers. This driver package supports GeForce 6, 7, 8, 9, 100, 200, 300, and 400-series desktop GPUs as well as ION desktop GPUs. What