Maytag Neptune - Recent Questions, Troubleshooting & Support - Page 3
We have a maytag commercial
well logically as superintendent you would be contacting the manufacturer of the machine and getting the details from them
or better still the land lord should be getting the details and passing them on to you or have the service agent come in and do the job for you as the cost is a tax deduction for him
A terrible smell coming from
If you mean your laundry sink, then mix 1 cup baking soda and 1 cup vinegar together and pour it into the drain. Let it sit in the drain for a few hours and then flush the drain with hot water. If you are tslking anout your washing machine you can buy a washing machine cleaner to get rid of the smell.
Washer won't complete spin cycle
Try pushing down lightly on the lid and see if the spin cycle starts back up. On mine, the same thing happened because the small plastic pin attached to the lid was just barely long enough to push the switch that tells the washer that the lid is closed. The spin cycle will only run when that switch is pushed, i.e., when the washer thinks the lid is closed.
Maytag Neptune front load washer with FL code
The "FL" is indicating that the door has failed to lock or it locked but the control does not sense the door has locked.
It could be caused by:
faulty door lock solenoid
loose wire connection
faulty door lock switch
faulty door lock sense switch
bad control board
I recommend calling a service technician to diagnose and repair your washer.
but try this first just in case....unplug it for 1 minute plug back in and see if the fault code clears.
good luck.
I have a top loading
In my opinion it would be better to download a service manual from the manufactures website to quench your frustration for a small price eric
Not finding what you are looking for?