Matsushita Popular Questions, Answers, Tips & Manuals

Remove power and defrost. Check heater element behind panels in back of freezer. With ohm meter should read 20 ohms or less. You could remove it and bring it to a local repair shop and have them test it and if required order you a new one. If this does not work it may be the control board

Your marriage, potentially.

To properly charge that freezer the system needs to be put into a vacuum to below at least 500 microns. Did you fix the leak? The only reason to put refrigerant into a system is if it leaked out. Also it has a critical charge and must be weighed in with a scale in onces. If it says 16 oz. It will not work right if you put in 15 or 17 oz. If you did all these things the only thing left is to replace the cap tube drier assembly or the temperature control. Hope this helps and good luck.

http://www.downloadsarea.com/Free_sony-vaio-pcg-5a1m-drivers/While I usually do driver downloads from CNet, this seems to be what you are looking for.

Here is how most are laid out. Have questions please let me know, Thanks Sea Breeze

We cut compressor open to see what happened to it. Grounded and found couple more issues.

Hi,

Many times a freezer and/or refrigeratordo not work right because of a dirty condenser coil...there are also many otherthings that can go wrong. If you are hearing a clicking or buzzing thencheck out the last two tips.

If your refrigerator is running but warm, then...

Check out these tips that I wrote about that... it is a great place to starttrouble shooting your unit...and something that you can do rather then callinga repair person to do a simple thing for you...

Refrigerator Condenser Coil Cleaning Refrigerator Repair

Refrigerator Troubleshooting Refrigerator Compressor

Refrigerator Compressor Start Capacitor and Start Relay
Refrigerator or Freezer not Cooling or Getting Cold

heatman101

--=-

Follow this procedure to resolve the error if the optical drive is missing from Computer in the Microsoft Windows Vista operating system.

WARNING: There is a risk of data loss. This procedure involves editing the Registry. Using the Registry editor incorrectly can cause serious problems that may require the operating system to be reinstalled and can result in the potential loss of data.

NOTE: A backup of the registry can be created.

Click the Start button, and then in the search box, type regedit.
Press the Enter key.
NOTE: If prompted for an administrator password or a User Account Control prompt is displayed, type the appropriate password or click Continue.

In the Registry Editor window, in the left pane, double-click the HKEY_LOCAL_MACHINE folder.
In the HKEY_LOCAL_MACHINE folder, double-click the System folder.
In the System folder, double-click the CurrentControlSet folder.
In the CurrentControlSet folder, double-click the Control folder.
In the Control folder, double-click the Class folder.
In the Class folder, click to select the {4D36E965-E325-11CE-BFC1-08002BE10318} folder.
In the right pane, click to select the UpperFilters registry value.
On the menu bar, click Edit.
In the Edit menu, click Delete.
In the Confirm Value Delete dialog box, click the Yes button.
In the right pane, click to select the LowerFilters registry value.
On the menu bar, click Edit.
In the Edit menu, click Delete.
In the Confirm Value Delete dialog box, click the Yes button.
NOTE: Do not delete the UpperFiltersBak or LowerFiltersBak registry values.

Close the Registry Editor window.
Restart the computer.

you can replace your matsuhita floppy disk drive by a DTX200 floppy disk drive emulator ,that work perfectly,no more trouble ..sincerely

Okay you could you be more specific?

It's best you buy a new floppy drive those arent expensive nowadays.

try to see ebay or trading news in australia
cheers

How can you have a R134a Compressor that is 32 years old. That gas was not even available then. What you are asking is impossible, unless you are asking can you change from possibly R12 to R143a. The answer is yes but it would probably be too costly. you see R12 ran with mineral oil whereas R134a runs with Polyolester oil. the system would have to be completely flushed out of old oil, and the expansion device ( capilliary tube ), would have to be changed and cut to the correct length to appropriate the correct displacement of gas.

Hi,
The compressor is bad....

As the weather is getting warmer for many people their freezer and/or refrigerator do not work right because of a dirty condenser coil...

Check out this tip that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...

http://www.fixya.com/support/r4024657-refrigerator_condenser_coil_cleaning


http://www.fixya.com/support/r3885294-refrigerator_troubleshooting

http://www.fixya.com/support/r4023749-refrigerator_compressor_start_capacitor

heatman101

It depends the model number, 452 BTU are 1/6 HP, R134a 776 BTU are 1/5 HP.

Common on the compressor will be L1 and L2 goes to the cold control
Diagram is HERE
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

it will be located on the compressor plate of the rateing of hourse power and amperage with the amount of freon needed to fill it.

if you used your drive for 2 years then change your drive it is the simple problem of hardware you want to change it now

are you needing to find the compressor on your fridge or a replacement?

only thing i could find was this http://www.panasonic.com/industrial/appliance/appliance_fans_panaflo_axial.htm if you contact them they should have that model.. All the best John