Major Hardware & Accessories - Page 7 - Recent Questions, Troubleshooting & Support
How to program noma timer 052 8814 2?
I have one of these. It is the most complicated timer I have ever used. I used to have to program it with the instructions in one hand and the timer in the other. In the end the internal memory battery failed and you could only program it when it was plugged in. The best thing to do it have someone read the instructions to you line by line. Or just play with it and press the Reset button when you have got the hang of it.
https://www.google.com/search?q=noma+timer+052+8814+2
..
My table warmer doesn't work. I get an E - when I try to set the timer.
Sorry, you are advised to provide details such as brand and model when asking hardware questions. Otherwise it is hard to discern whether you are talking about a massage table warmer or a device for keeping tortillas warm. You can resubmit or try a Google search for a user manual for the device adding the brand and model to the search phrase.Or, go to the brand page and search for support, or a guide, or troubleshooing for the model there. Error messages generally vary in meaning across brands. Here are some brand names of massage table warmers:
https://wekompare.com/massage-table-warmers
Orbit 6 station Water Timer model #57976
I need someone to talk me through programming my orbit 6 zone sprinkler system ASAP can you call me and not charge me and talk me through it? My no is 4356333446
Need instructions for a Timex Timer Moder #TE111 (TX12694TA)
To set the timehold down the TIM button until Day flashes, Use +/- to adjust then hold down time until hour flashes..Repeat until set.
To program,
1. hold down prog until the cursor starts to flash at 12:00
2. Press PROG to advance to the day or day group you want to program.
3. press + to advance the cursor to the desired ON time
4. press mode until display reads "on"
5. use the + to move the cursor to the desired ON duration? Clock shows this also.
6. press mode until "off" is displayed. then advance the cursor thru the period the outlet should be off. (stupid to have to do this!)
7. press MODE to select as the ON or OFF period(!)
8. press TIME to exit programming.
9. Press PROG again to program another set of days.
Stupid system.
Good luck.
Dave
Not finding what you are looking for?