Mag Innovision Computers & Internet - Page 5 - Recent Questions, Troubleshooting & Support

Certainly due to a to high resolution...Regards,Louis

It's not communicating with PC video card. It should pick up the input port, but make sure on monitor is set to correct input like VGA. You can try re-seating video card. Also test with VGA if you are using HD like HDMI.

go to set up menu then select the brightness adjustment and then exit.if can get with adjustment turn off then unplugged don't use for an hour to reset the power supply.

check your software,

Hi..there,
The lamps has nothing to do with it... what you need a new backlight inverter or repaired it by replaced a couples of bad capacitors... Sound easy... right! Not so... It's not always the caps problems.

Hello,If you need the whole adapter, you can get them here:http://www.ccl-la.com/catalog/product_info.php?products_id=48If you need just the power cord for the adapter they are available herehttp://www.ccl-la.com/catalog/product_info.php?products_id=50I hope this helps.

I recently was given a MAG Model 780 too. I found the input for speakers just today. When looking at the monitor, on the left side behind the monitor you should be able to feel a flat horizontal surface. If you lay monitor down, you will see 2 mini-plug openings. These are your input spots for speakers/microphone. I believe pink is speakers & green is microphone.

The power adapters are available here:http://www.ccl-la.com/catalog/product_info.php?products_id=48