Mackie Music - Page 5 - Recent Questions, Troubleshooting & Support
I have an mackie cfx 12 on which the effects do
Yes, send this to a Makie repair facility. Chaances are there is a chip going bad... most likely the A-D or D-a convertor.
Try putting this is your freezer and then immediately test it. This MIGHT indicate if problem is easily found with circuit cooler spray.
The OL and THERMAL LEDs turn on quickly after an even very low level signal input.
These subs are renowned for problems. The PSU and the output stages as well as the main driver are all weak and there are a number of companies that will upgrade them and sort out other issues such as vibrations. Assuming it is out of warranty and you really want to use this you would be best going to a specialist repairer to get it sorted not Mackie.
A output working not b
This will likely be a component level issue. I suggest taking it to the shop. Call and ask them, but some repair guys prefer you pull the amp out to save space in their shop.
Mackie srm 350v2 speaker packed up
I believe there is an internal fuse in these which, according to a friend who has these, seems to blow occasionally for no apparent reason. He has also had to send two back for replacement and would not buy again, they seem to be inherently unreliable although they sound great.
Srm350 active-2 internal fuses on pcb-one had
Either a short in the power supply such as diode(s), capacitor, or transistor(s) or in the power amp. It will require service. Replacing the fuse before repair will likely damage more components... don't do it!
Mackie profx12 fuse keep blow
Be sure the capacitor was replaced with the correct polarity?
in the beginning of my tech career I have replaced caps back words on accident. ..
Not finding what you are looking for?