Lorex Answered Questions & Fixed Issues

If your Lorex LHV1000 HD DVR is not booting up, there are a few things you can try:

1. Check all cables and connections: Ensure that all cables are securely connected to the DVR and that there are no loose connections or damaged cables.
2. Restart the DVR: Disconnect the power cable from the DVR, wait for a few minutes, and then reconnect it. Try to power on the DVR again.
3. Reset the DVR: If restarting the DVR doesn't work, try resetting it to its default settings. This can be done by pressing and holding the reset button on the back of the DVR for about 10 seconds.
4. Check the hard drive: If the DVR is still not booting up, it could be due to a faulty hard drive. Try removing the hard drive and connecting it to a computer to check if it's still functioning properly.

If none of these steps resolve the issue, it may be necessary to contact Lorex technical support for further assistance.

The Lorax MC2700 is a portable radio that does not have Wi-Fi or Bluetooth connectivity. As a result, it cannot be viewed or controlled from a phone or other device. It can only be controlled using its physical controls

If your Lorex DVR won't turn on, it is likely that the power cord is not properly connected. Make sure that the power cord is securely connected to the DVR and that the power switch is in the "on" position. If the problem persists, you may need to replace the power cord or contact the manufacturer for assistance.

Question edited for clarity. Question moved from Cellphones Category. Some troubleshooting ideas https://www.google.com/search?q=Lorex+Ec04+960H+can%27t+recover+footage ..

This camera demands a 9V DC 200mA. Not 12V.

https://help.lorextechnology.com/link/portal/57356/57366/Article/1299/DVR-NVR-Default-username-and-password

Not from us! We are Fixya dot com, we aren't Lorex. Here is a link to their Support. https://help.lorextechnology.com/ ..

apparently lorex technology has good customer support https://help.lorextechnology.com/ looked at the manuals from lorex they do not mention your issue

Lorex Firmware Updates ' Lorex

www.lorextechnology.com > support > Firmware

download the lastest firmware for you lorex products such as dvr, nvr and security cameras, you will be able to upgrade your system upgrading your firmware.

Contact Lorex directly to request a manual for model SG6153.

Contact Lorex directly to inquire.

Free online instructions: https://www.lorextechnology.com/downloads/discontinued-b4-2010/SG6153_TRIFOLDQSG_EN_R6_PAL.pdf

https://www.youtube.com/watch?v=hVr-DlmNock

needs to port forward in router at home. this means outside global world >>> Your router Global IP ADDRESS >> .....YOUR Home Router .....>> Port forward >> internal IP address Camera using on your home network https://www.youtube.com/watch?v=SEKqtc5bnxU

contact the maker is best, go there read the contact page. and ask. no 2 wireless cams or systems work the same ,unless are.

would first check the plug in power unit is giving correct output (by substitution) first .

red + 12v black - yellow video out green video ground

Replace the power adapter.

hi its hard to retrive the deleted footage but try this one

Hiren's BootCD 15.2 ' Hiren's BootCD PE its a boatble via usb thiers a lot of option to revoder deleted files

NORMAL ON POWER UP , IT;S TELLING YOU POWER HAS BEEN CYCLED AND OPERATOR NEEDS TO CK THAT SYSTEM HAS RESTORED CORRECTLY ,USE MOUSE TO CLICK BELL ON BOTTOM EDGE OF HOME SCREEN TO CANCEL BEEP !