Need driver for Logitech V-ub2 Webcam
1st You download Webcam Driver.
driver for LogitechAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.
9/10/2019 3:53:36 AM •
Logitech...
•
Answered
on Sep 10, 2019
Logitech s510 keyboard
I had this problem for a very long time as well. Turns out this is an encryption issue. It's off-balance. You need to reset the encryption, and here's how:
On the LEFT side of your wireless keyboard press and hold Ctrl+Alt, and press F12, then release all three buttons. Now push the Connect button on your Wireless Receiver, then the connect button on your wireless keyboard. Now press Esc. Try it. See if it works. It did for me.
9/7/2019 10:59:54 PM •
Logitech...
•
Answered
on Sep 07, 2019
When I call someone or someone calls me, my voice
1) make sure your mic is set as default
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard
SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays
Restart computer
2) Check you have DirectX 9 or later installed to support your cam
3) You may have to re-install the software - browse the photo gallery and click on your model - check out any known problems as well
http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405
Hello Carla here. So I purchased on eBay months ago a Logitech harmony 1000 universal remote but it did not come with any manuals or cords on how to program and set it up. Can u help?
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
{View the site in web view by Mobile or a desktop to see the search box. Mobile view has no search box.}...
7/5/2019 8:39:02 AM •
Logitech...
•
Answered
on Jul 05, 2019
Can't get webcam to work with AIM, why?
THE REAL SOLUTION!!!!
You probably have multiple video cameras and AIM has defaulted the wrong one
on AIM:
1. go to edit
2. settings
3. enhanced im
4. audio & video
5. camera
6. choose something other than default
7. apply
8. repeat 1-7 until the image appears
do NOT click on video under innivations
6/27/2019 8:47:40 AM •
Logitech...
•
Answered
on Jun 27, 2019
Madden 08
Hey You Must Go to Your Controller Settings in Madden 08 and Activate Vibration. If That Doesnt Work Download and Install This application - LGS501.exe ( Search In Google) And Select Vibration Before Download. In that Application You can control everything. NOTE: IF THIS DOESNT WORK MADDEN 08 IS NOT VIBRATION SUPPORTED.
if U Need Any Help , Questions , Drivers , softwares, Games,Patches, Cracks , Serials, Win Help , Vista or XP --- JUST EMAIL ME WITH THE THING U WANT TO -
[email protected]
6/4/2019 3:39:49 AM •
Logitech ...
•
Answered
on Jun 04, 2019
Speakers won't turn on
Have you checked the fuse in your plug. If the fuse has blown it won't work in any wall socket. Change the fuse for a new one anyway, then try again.
Not finding what you are looking for?