Little Tikes Answered Questions & Fixed Issues

Question edited for clarity. Question moved from Cars and Trucks category. If it runs backwards, then the problem but be the forwarding part of the controller. Usually your local Model Shop will know a repairer, or they might undertake it themselves. ..

Try the company direct.

Little Tikes ' Replacement Parts

Little Tikes https://parts.littletikes.com Little Tikes makes toys that last. Shop available replacement parts for your Little Tikes toys. View Little Tikes parts here. ‎Little Tikes 7' Trampoline · ‎Ride-on Toys

• All Products - Little Tikes ' Replacement Parts

  https://parts.littletikes.com > collections > all-products Items 1 - 12 of 92 - Shop Replacement Parts. Active Play Baby Toys and Gear Playhouses Ride-ons and Wagons Kitchens and Workshops.

• Home page - Little Tikes ' Replacement Parts

  https://parts.littletikes.com > collections > frontpage Hardware Pack: Cooking Pot, Bowl, Cups, Knobs, Plates, Rake, Shovel, Dirt Pod, Flower Pot. $34.99. Playhouse is an open design with a working door.

Question moved from Cars and Trucks. This says it is only supposed to run for 30 seconds, so it must have some sort of timer, perhaps in the chimney stack. The other possibility is that the electric motor needs cleaning and lubricating. If you have a Model Shop near you, they normally do repairs or know someone that does. It is a $90 toy so worth repairing! START/STOP BUTTON With fingers away from track, press top of smoke stack to start and stop train. (Train will move for 30 seconds then stop. Press smoke stack to start train again.)

657559 Little Tikes Tumble Train

You can buy a new plastic slide from a company that sells swing sets, but the slide is probably going to cost more than a whole new swing set. The slides can be pricy when purchased separately. You might want to consider upgrading and going with a new, sturdier swing set. As far as I know, there is no way to repair the cracked slide since it is molded plastic.

My little tikes glow speak pig flashlight is not working I need to fix it so it will work again if I fix it

I hope this video can help you. https://youtu.be/XMwmHLjBR-M

The caps are a type of "acorn nut". Check a local hardware store (not the big guys) for this type of fastener and bring the shaft with you to get the correct size. These should not cost more than about $.50 each.

Dan

Same problen..

I’m trying to find the name of this Little Tykes play structure so we can get the instructions for it to put back together. We purchased it used from a online site.

Yes they are, this is what I got of the little tykes website, it's the ADOBE instructions, 62451R100-2-06.pdf
I hope it will be of help, have a great day :)

Unfortunately Little Tikes does not carry replacement parts for the 4089 ImagineSounds Interactive Playhouse, as you can see in the provided link. I have, however, included the Instruction Manual, which includes the part numbers. I think for these parts you will have to search on sites like Amazon or Ebay. https://www.littletikes.com/mas_assets/media/pdf/4449-Imaginesounds-Playhouse.pdf

They might have it in the stores, but chances are slim. Then go online to see if you can find the part. If not there go to the company and they will send you the part you need. Or tell you where you can get the part.

Amazon or ebay has great list

I figured out this problem today. I was ready to get a torch and saw to get it apart. It looks so simple and everything says no tools required. If your like me and bought it used, you don’t even know how it went together to reference from. So, start with the roof it’s easy to remove. For the walls I used a crowbar and brut strength. I turned it onto the back wall side. So the door should be facing up to the sky. Now, get the crowbar or something to use to get in between the roof log and the side wall log. Now pry up on the roof, push hard! The wall will slide up and break free from it’s locked together position. I quickly rejoiced and was happy when I Hurd the thunk and saw the wall moving a bit. I pulled up on the wall and quickly went back into frustration mode. But don’t fear, this is where the brut strength come in. I stepped on the wall flat on the ground and got my shoulder under the wall facing the sky. I stood up, my shoulder pushing the top wall and bam ??! One of the side wall logs jammed into the top wall came loose. After that I just kept doing the same thing and eventually was able to disassemble the rest. Two people may make this easier but I had just me and my two year old.

Tools needed: Pry bar and a strong shoulder

Hi there are some Thomas the tank decals on E/BAY...cheers

Sorry we have no parts locator here.

https://parts.littletikes.com/

Try an epoxy plastic repair kit from Home Depot or Lowes...should do the trick!

notify manufacturer or online search using the make and model

use double sided tape or little bit of glue