My 180 MigPak will not deliver argon to the torch.
Your gas hose or torch could be bad or plugged. Your gas solenoid on the welder itself could be bad. Disconnect the torch gas hose at the welder and see if you have gas coming out of the welder itself.
Where can i find a gun
you can go to airgas, praxair, or any welding distributor and buy a Tregaskiss gun as a replacement. They are awesome!.
I HAVE A LINCOLN PRO
Hello. You may have a problem with the unit or it could be your power supply. Read on.
The torch uses a two cycle approach to producing plasma. First, a high-voltage low-amperage circuit is used to initialize a very small high intensity spark within the torch body, thereby generating a small pocket of plasma gas. When cutting begins, the second circuit trips in and changes the current to a low-voltage high-amperage circuit, thereby initiating a high-speed powerful jet of plasma.
It appears that your problem is with the power supplying your welder and not the welder itself. Begin by plugging your welder in at some other location to determine whether the problem is with the welder or your building's power. Joe
Not finding what you are looking for?