Life Fitness Logo

Life Fitness Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 218 Products
  • 959 Answers
  • 117K Views

alot of times you have to remove the wax spray nozel and clean as the wax hardens over it

Life Fitness... | Answered on May 28, 2015


If the walking belt has shifted to the left, use the Allen wrench to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left rear roller bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centred.

Life Fitness... | Answered on May 28, 2015


Dear Sir:You can have some pencil, and with the point of the pencil, go under the display board, in the small orifice, and with the point of the pencil press the small button, and ready. Restart the machine.
sincerely. God bless you

Life Fitness... | Answered on May 14, 2015


Remove the motor cover and look for the Wax lift board , it's right by the motor controller and check all wiring going to it.

Life Fitness... | Answered on May 09, 2015


Check the wire harness from the console to MCB.. Most likely the wire is pinch between the frame and upright post.

Life Fitness... | Answered on Apr 09, 2015


Probably. Owner's manual should have instructions. No instructions? go back to store purchased from or Manufacturer.

Life Fitness... | Answered on Mar 04, 2015


adjust the magnet, tight the bolts with wren. Test the magnet, with the magnet from refrigerator, for repel and attract, if donot, replace.
The resistance depende of it.

sincerely. God bless you

Life Fitness X3... | Answered on Feb 22, 2015

Tip

95Xi Crosstrainer Crank Arm Cover Replacement


About This Video


Crank Arm Cover Removal and Replacement Video for the 95Xi LifeFitness Crosstrainer


  • This video demonstrates how to remove and replace a Crank Arm Cover on a Life Fitness 95Xi Crosstrainer elliptical


Necessary Tools:


  • Philips Screwdriver


  • 5/32" Allen Wrench


  • 2MM Allen Wrench


  • T25 Driver


  • T50 Driver




  1. Remove the main shrouds as seen in the shroud replacement video


  2. Remove the outer link cover as seen in the outer link cover removal video


  3. Remove the pedal lever assembly (as seen in Sportsmith's Pedal Lever Replacement video) on the side where the crank arm cover replacement is needed


  4. Remove the two bolts holding the crank arm cover in place, and remove the crank arm cover


  5. Replace the parts in reverse order




LifeFitness 95Xi Crank Arm Cover Video Removal and Replacement

on Feb 11, 2015 | Life Fitness Crosstrainer, 9100,...

Tip

95Xi Crosstrainer Shroud Replacement


Video Presentation of Replacing the Main Shroud on a LifeFitness 95Xi Crosstrainer


  • The video shows the steps involved in replacement of the main shroud on a LifeFitness 95Xi


  • Tools:



    • Phillips Screwdriver




  • Remove the (4) screws securing the main shroud to the drive frame assembly



    • There are two screws on each side




  • Lift straight up on the shroud to remove it


  • Install the main shroud in reverse order



    • Making sure the main shroud fits into the grooves of the lower shroud panels




Repair Video for LifeFitness 95Xi Crosstrainer Shroud Replacement

on Feb 11, 2015 | Life Fitness Crosstrainer, 9100,...

Tip

95Xi Crosstrainer Drive Belt Replacement


Drive Belt Replacement Video for LifeFitness 95Xi Crosstrainer Elliptical

Tools needed:


  • Philips Screwdriver


  • T25 Driver


  • T50 Driver


  • 2MM Allen Wrench


  • 5/32" Allen Wrench




  1. Remove the main shrouds as seen in the main shroud removal video


  2. Remove the left outer link cover as seen in the Outer Link Cover removal video


  3. Remove the left pedal lever assembly as seen in Sportsmith's Pedal Lever replacement video


  4. Remove the two bolts holding the crank arm cover in place, and remove the crank arm cover


  5. Walk the drive belt off the pulley and remove it from the unit


  6. Install the new belt around the crossover shaft first and then walk it onto the pulley


  7. Replace the remaining parts in reverse order


LifeFitness 95Xi Drive Belt Video How To Replace

on Feb 11, 2015 | Life Fitness Crosstrainer, 9100,...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Life Fitness Experts

Vincent_G
Vincent_G

Level 3 Expert

2360 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Are you a Life Fitness Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...