Life Fitness Logo

Life Fitness Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 218 Products
  • 959 Answers
  • 117K Views

If you wish to get some details about treadmill visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Life Fitness... | Answered on Jan 01, 2017


You have to check the Elevation limit switch.
If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Life Fitness F1... | Answered on Dec 28, 2016


unplug and re plug all connectors and test

Life Fitness... | Answered on Dec 06, 2016


If you wish to get some details about treadmill error codes; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Life Fitness... | Answered on Nov 11, 2016


If you wish to get some details treadmill repair and calibrations; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Life Fitness... | Answered on Sep 02, 2016


Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

I would suggest removing your heart rate grips and inspecting the contact leads for rust or any other corrosion. This is very commonly an issue and can be resolved by either cleaning the contacts or simply replacing the parts. Using the following link, and your serial number, you should be able to find the contact grips if you end up needing them.


Repair Parts for LifeFitness 95T 95Ti 95Te Treadmills Midline SPORTSMITH...

Life Fitness... | Answered on Jul 11, 2016


Does this treadmill have a wax system ? If it does it will have side access panels on the side just above the rear leveler. The picture that shows here does not but need to be sure it does not really need wax.
If it does not have a waxer- enter maintenance settings on display console,I do not have one in front of me but I believe you hold pause button down and press clear twice. This should bring up maintenance settings.
Scroll using up down arrow untill you see replace wax bag or something to that effect. select [enter ] to save. press clear clear to restart.

Life Fitness... | Answered on Jun 12, 2016


If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Life Fitness... | Answered on Jun 03, 2016


I haven't seen that exact model myself, but i work on a variety of things for people and have had customers with the same complaint. my usual remedy is apply some 3-in-1 oil or even wd-40 lubricant to the parks that squeak and clank as long as no electronics are nearby to get covered, if so just take precautions not to spray your logic boards, powersupply, etc. and if and when possible, i like to use small pieces of foam stuffed into certain cavities in the plastic as long as they wont get caught in any moving parts or impede the electronics. keep in mind this wont make it completely 'silent' but it will reduce the noise factor slightly, and the lubrication may very well make the bike itself perform more smoothly.

Life Fitness... | Answered on May 09, 2016

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Life Fitness Experts

Vincent_G
Vincent_G

Level 3 Expert

2360 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Are you a Life Fitness Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...