Life Fitness Logo

Life Fitness Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 218 Products
  • 986 Answers
  • 143K Views
0helpful
1answer

Lifefitness recumbent bike battery not charging

Possible causes for a dead battery or it not holding charge 1. Battery has lost its ability to hold a charge (dead battery) 2. Charging system on unit has failed (battery cables, alternator, or alternator control board) 3. Stuck key on the display is causing a constant draw from the battery. For any further troubleshooting you can contact our Technical Support Team and we would be happy to help you, online or by phone 888-713-2880 or http://www.sportsmith.net/supportsearch.aspx
6/4/2015 9:03:11 PM • Life Fitness... • Answered on Jun 04, 2015
0helpful
2answers

How do I keep console light on for entire class?

You are powering the display while you bike, it has an auto dim feature to conserve electricity for the LED display that displays all your stats like time spent biking, calories burned, etc. There probably really is not a way to keep the light on.
6/4/2015 3:57:24 PM • Life Fitness... • Answered on Jun 04, 2015
0helpful
2answers

Lifefitness treadmill belt sticks even though wax bag is fulll

alot of times you have to remove the wax spray nozel and clean as the wax hardens over it
5/28/2015 10:30:28 AM • Life Fitness... • Answered on May 28, 2015
0helpful
2answers

Life fitness 95ti belt moving to one side any way of correcting

If the walking belt has shifted to the left, use the Allen wrench to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left rear roller bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centred.
5/28/2015 10:29:51 AM • Life Fitness... • Answered on May 28, 2015
0helpful
1answer

How do i change a life fitness cross trainer from mph to kph

Dear Sir:You can have some pencil, and with the point of the pencil, go under the display board, in the small orifice, and with the point of the pencil press the small button, and ready. Restart the machine.sincerely. God bless you
5/14/2015 12:36:52 PM • Life Fitness... • Answered on May 14, 2015
0helpful
2answers

Display screen says waxer disconnected how do I fix

Remove the motor cover and look for the Wax lift board , it's right by the motor controller and check all wiring going to it.
5/9/2015 6:48:57 PM • Life Fitness... • Answered on May 09, 2015
0helpful
1answer

Why display cannot receive signal from motor main board

Check the wire harness from the console to MCB.. Most likely the wire is pinch between the frame and upright post.
4/9/2015 5:36:37 PM • Life Fitness... • Answered on Apr 09, 2015
0helpful
1answer

Can a 9500hr next generation treadmill be disassembled to go through a 34 inch wide door opening?

Probably. Owner's manual should have instructions. No instructions? go back to store purchased from or Manufacturer.
3/4/2015 4:07:24 PM • Life Fitness... • Answered on Mar 04, 2015
0answers
0helpful
1answer

I have Life Fitness X3 elliptical machine, and when I start pedalling/striding the level setting goes to

adjust the magnet, tight the bolts with wren. Test the magnet, with the magnet from refrigerator, for repel and attract, if donot, replace.The resistance depende of it.sincerely. God bless you
2/22/2015 7:09:01 PM • Life Fitness X3... • Answered on Feb 22, 2015
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Life Fitness Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Life Fitness Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...