LG Recent Questions, Troubleshooting Help & Support

WARNING : Performing a hard reset will remove ALL data including the Google account, system data, application data, application settings, and downloaded applications.

1. With the phone off, press and hold the Home key, Volume Down key and Power button. When the LG logo appears, release only the Power button.
2. Release the Home key and Volume Down key when the Android icon appears.
3. Follow the on-screen instructions.

Your source has to be in HD like a local broadcast TV station currently broadcasting in HD which you get with a VHF/UHF antenna connected to the HDTV. Most primetime TV shows are in HD so using the antenna on the HDTV is all you need. Press MENU on your TV remote and make sure you have ANTENNA set instead of cable to get local TV stations.

You also could use your local cable TV provider. You would need digital cable service and a HD cable box with HDMI or component video cable hookup to the HDTV. HD channels are typically above 100. Call your cable TV provider for more details.

Read your user manual for the LG TV. Ask for help from family, friends, neighbors, local electronics shops.

Likely to be the power board, but read this... https://www.fixya.com/support/r29790007-repairing_own_television A good option is to buy a 'board repair kit'. ..

Hi Jimmy, it's unfortunate that you threw boards at the set without doing some troubleshooting, you have bad LED backlights, it's a common issue for the model set you have, new strips can be ordered from shopjimmy.com and installed yourself, use extreme care when handling the panel.

The thermal fuse is faulty. Or the vent is clogged and no gas flow. Or there could be a faulty circuit breaker.

possible flame sensor dirty or bad or burner tube has blockage

Here is the Board Kit for the set. The switching on and off is likely to be the power supply. WiFi issue if likely due to interference, where the television is located and a weak signal. Connecting via Ethernet is always preferable. You can swap boards out and see if it improves the blue tint. https://www.google.com/search?q=lg+43uh6030+board+kit+replacement Our Television Expert is 'Larry'. He may drop in soon. ..

Remove the contaminated and fit a new Waveguide cover.

Here are the steps to program your OneForAll URC 3050B00 remote to control your LG smart TV:

Turn on your LG smart TV.
Press and hold the "TV" button on your OneForAll remote until the LED light on the remote turns on and stays on.
Enter the 4-digit code for LG TVs. The most common codes for LG TVs are 0030, 0056, 0178, 1265, and 1398, but you can also find a complete list of codes on the OneForAll website or in the manual that came with your remote.
Press the "Power" button on the OneForAll remote. If the TV turns off, the code has been successfully entered. If the TV does not turn off, repeat steps 2-4 with a different code until you find the correct one.
If none of the codes work, you can also try the code search function on your OneForAll remote to automatically find the correct code:

Turn on your LG smart TV.
Press and hold the "TV" button on your OneForAll remote until the LED light on the remote turns on and stays on.
Press and hold the "SET" button on the remote until the LED light blinks twice.
Press the "9" button on the remote. The LED light should blink twice again.
Point the remote at your TV and press the "Power" button repeatedly until the TV turns off.
Press the "OK" button on the OneForAll remote to save the code.
I hope this helps you program your OneForAll remote to control your LG smart TV!

As far as I know the BD550 has automatic region selection if you put in a DVD for any region it should select automatically

Have not tried it so on your own head be it!Power onOpen trayPush Info button on remote (only once,supplied remote)When numbers come up push 9Keep trying until 9 appears in upper left of screenPower offPower on.Good luck!

It's difficult to determine exactly what may have fallen behind the panel of your LG DLE7100W dryer without a visual inspection. However, it's possible that you may have accidentally detached a small part or screw that was holding something in place. The rolling sound that you're hearing when the dryer is turned on could be a loose part or screw that has fallen behind the panel and is now moving around inside the dryer. This could potentially cause damage to other components if left unaddressed. I would recommend stopping any further attempts to disassemble the dryer and instead, contact a professional technician to inspect and repair the dryer. They can determine what may have fallen behind the panel and take the necessary steps to fix it safely and properly.

press the menu button

1. Check to see if there is any type of damage to the screen, such as a scratch or crack. 2. Try adjusting the picture settings on the TV, such as brightness and contrast. 3. Check the connections between the TV and the external devices it is connected to, such as a DVD player or cable box. 4. Try unplugging the TV for a few minutes, then plugging it back in to see if the lines go away. 5. If none of the above steps work, it may be necessary to contact the manufacturer for a repair or replacement.

It is possible to repair an LG Stylo 4 with a cracked screen that shows only a black screen to extract data from it. However, the success of the repair will depend on the extent of the damage to the screen and other internal components.

You can take your device to a professional phone repair shop and ask them to repair the screen. Once the screen is repaired, you should be able to access your data on the device. If the screen repair is not possible or too expensive, you may be able to extract data from the device by connecting it to a computer with a USB cable and using a data recovery software.

Note that data recovery software may not be able to recover all the data from the device, especially if the device has suffered significant damage. It's always a good idea to regularly back up your data to avoid losing important files in case of accidents or device failure.

id like to help but probably need a bit more detail, im just not sure what you mean by that statement

The problem in that case is loose connection.Plss check first the wiring of the speaker then the speaker then the amplifier located at the board of your television.Try to fix wiring use soldering iron if there's a loose connection at the board..

It could be here that your TV has stopped working and has died too.

The most likely issue is the output resolution on the RC397T. It could be set to 1080p (progressive) and needs to be 1080i (interlaced). I've seen this happen with other set top boxes. On the front panel of the DVD/VCR recorder, there is a button labeled Res. It's to the left of the USB port and to the right of the DVD/VCR selection button. Each press of the button will change to a different resolution: 1080p, 1080i, 720p, 480p, 480i for HDMI. (The resolution button also changes the component out resolution between 480i and 480p. You may need to step through these choices, as well, even if the component out isn't in use.) Due to some issues with resetting the resolution, you may need to turn off the DVD recorder and possibly the TV after some of the resolution changes to see any video output change. I hope this helps. The user manual for the RC897T is available from the support page: https://www.lg.com/us/support/product/lg-RC897T.BUSALLK . The manual link is on the right hand side of the page. My browser gives the direct link to the manual as https://gscs-b2c.lge.com/downloadFile?fileId=KROWM000185603.pdf . See page 60 for the front panel button descriptions. Cindy Wells