LG Office Equipment & Supplies - Recent Questions, Troubleshooting & Support

That might be better directed to the manufacturer. But here is what I find: https://itigic.com/why-fingerprint-sensor-of-a-mobile-phone-get-hot/ Of course, a phone can get hot from sitting it on a dashboard.

Turn on the projector and press the Menu button on the remote control. Use the arrow keys to navigate to the Option menu and press Enter. Navigate to Lamp Time Reset and press Enter. A confirmation message will appear on the screen. Select Yes and press Enter.

For the LG LED TV, you can find the manual and code information on the LG website. As to the codes for the remote, no I can't find them. BUT they might be in the user guide if the following site is legit. You do have to register to get its download. maxent rc 282 remote manual (suprlative-medai.com) I don't even know if they charge for it. I'm not that game to register. There are sites that sell the remote. I'd make use they sold the manual along with it! Just an idea, considering you have the remote. But it might be easier to pick up another universal remote from Wal-mart. The only other link to the manual turned out to be a guy who said in 2012 that he had the manual and for the person who was seeking it at the time to contact him. That suggests this is a pretty old remote you are trying to find the manual for. But maybe you will download it from the link I provided --at your own risk. Some such links are okay, others not. I would at least install Malwarebytes before trying the download.

Usually caused by overheating. It switches off to protect itself. Anonymous, yours sounds like the bulb has failed or the step up transformer. They used to be an HID arc lamp, but the specs say it is an LED! That seems odd to me. https://www.google.com/search?q=lg+pb62+g+projector+switches+off https://www.flipkart.com/lg-pb62g-500-lm-2-speaker-wireless-remote-controller-projector/p/itmefbk4gweehcvj .. ..

The vertical colored lines that usually show up on a TV's screen is caused by the T-Con board is not working properly. Lots of times this can very easily be caused by from wiring that is not been fully securely fastened.Or the T con board is not working and will have to be replaced.

Your projector will need to be repaired in order for the white lines to stop showing up.

Because of this fact, Jasbo, LG has lost all future business from me.

These instructions are taken from page 44 of the User Guide.

Turn the power off but keep pluged in. Press the buttons on the control panel in the sequence as below.

Press "Up Arrow", Press "Down Arrow", Press "Left Arrow", Press "Right Arrow", Press "Menu", Press "Enter".

Lamp time will be initialized

In PSU, on the secondary side of switch supply there are electrolytic capacitors: for 13 V is 470uF/25V and for 5 (and subsequent 3V) is 1000 uF/16V. Those capacitors in some devices from this series use to break (why? I don't know: maybe cheep quality). Check voltage on rectifiers outputs with oscilloscope: if there are not constant voltage on one of them you should replace it with the new one (of course good quality). I've got the same failure subsequently on 5V supply (this reparation was done by LG service, but when I asked them they answered they replaced mother board - bull shit!) When the same "flashing" problem after guaranty occurred again, I had found soldering traces on the cap on 5V!And guess what - it was cap with a different brand than others.



This solution is maybe only for el-geckos, but no service wanted to repair my quite new, still worth something projector (not in Sweden any way). If you can’t do a job your self you still can ask some handy friend which know how to solder parts. Be careful! There is high, dangerous voltage on primary, so you must know what you are doing!



I'm sometime very irritated: that capacitor cost less in bulk than 2 cents each! But the ordinary people must buy a new projector because of lack of service!

There is PSU diagram:

go to set up menu then lamp hours to reset

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/

Hello,

Maybe the paper sensor isn't work properly. Check the sensor.

Your MacBook should recognize the default file system already used to pre-format the LG extenal hard drive at the factory. You'll be able to write and read from it without issue. In fact, if you intend to ever also use it with a Windows machine, using it and leaving it in its pre-formatted state is recommended. As a novice user, I'm imagining you'll use the external drive for file storage. You'll only need to format it specifically for your MacBook if you intend to use it for more specialized MacBook tasks (like using the built-in Mac backup utility). In which case, the instructions to format it for Mac is available here - Format an External Hard Drive or USB Flash Drive for Mac OS

If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/