LG Microwave Ovens - Page 4 - Recent Questions, Troubleshooting & Support

replace fuse inside with 10amp

check the elements on top of inside the mwave

very very unsafe

replace motor under microwave at bottom

switch is faulty at inside could be burnt

replace transformer on pc board

replace fuse by transformer if it had one or check diode it could be the cap ifit does not work replace magnetron good luck

check transformer on pc board maybe a winding is faulty

check door switch or replace magnetron

Paper towel can be quite abrasive. Use DeBruce Polish with a soft terry towel. We use DeBruce Polish on all of our stainless steel. DeBruce Polish also works on glass cook tops. We get DeBruce Polish at debrucepolish.com.

only 2 screws on right side inside casing opposite transformer

Australian and Indian and other web sites are shown in Google search. https://www.lg.com/au/support/support-product/lg-MC-924JLA LG MC 924JLA Product Support Manuals Warranty More LG Australia

Yes, I have had the same problem repeatedly. It turns out, GFI's are not made for Microwaves, many electric motors, etc. I had to give up trying after a couple years. I now do not plug microwaves into GFI's. God bless your efforts.

no there is not 13 years is a long run on a microwave

did u check plug n internal fuse..lol. my diode that went to earth was the culprit coz my microwave leaked into base and diode to stop leakage to earth had blown