LG Cell Phones - Popular Questions, Answers, Tips & Manuals

To add Bluetooth functionality to your LG FB163, you can use a Bluetooth adapter that is compatible with the device. Ensure that the adapter you choose is compatible with the FB163 model. Once you have the adapter, follow the instructions provided with it to connect it to your FB163 system.

To connect your Android phone to the FB163, you'll need a compatible cable. Typically, you would use an auxiliary (AUX) cable with a 3.5mm jack on both ends. Plug one end into the headphone jack of your Android phone and the other end into the AUX input port on the FB163 system. Then, select the AUX input mode on the FB163 to hear the audio from your phone through system.

The wheels have no locks on them. If you want to use the wheels you have to screw in the feet. https://www.google.com/search?q=LG+refrigerator+LMXS27626S.+How+to+unlock+the+wheels ..

Question edited for clarity. The problem here is not knowing what the 'Bluetooth Touchscreen' is on? This is normally an issue shaking hands to complete the connection. https://www.fixya.com/support/r26362721-pairing_bluetooth_devices ..

Contact your service provider.

check here.... https://www.tunesbro.com/wipe-everything-off-lg-phone.html Best to you.

Question edited for clarity, I presume you meant LG not 'PG'? It sounds like it is PUK Locked, also known as a SIM Lock. https://www.fixya.com/support/r26056685-phone_asking_puk_code and in simpler terms https://www.fixya.com/support/r26230986-phone_asks_puk_code_ask_another_way ..

Question edited for clarity and typo. It takes a Micro SD Card in the upper right edge. Page 12 of the Manual shows it. https://www.lg.com/us/mobile-phones/pdf/LS670_%20Optimus_S_UG_1.1.pdf https://www.google.com/search?q=lg+ls670+insert+micro+sd+card ..

LG TV - How to update an LG Smart TV ' LG USA Support Software Update - LG 42PQ20D-AA Owner's Manual [Page 46] ' ManualsLib

1. Turn the phone off.
2. Press and hold the Power/Lock key (on the right side of the phone) and the Down Volume key (on the left side of the phone) at the same time.
3. When the Factory data reset screen appears, release both of the keys.
4. Use the Volume keys to highlight Factory data reset, then press the Power/Lock key to confirm.
5. Use the Volume keys to highlight Yes, then press the Power/Lock key to confirm one more time.
6. Your phone will perform a factory reset.

Question edited for clarity. Question moved from Computers to model category. There are three types of lock and you don't tell us which? Consumer set pass code. Locked to another carrier. PUK Locked. https://www.google.com/search?q=vortex+z22+cell+phone+locked ..

Metro as in Galen Weston's supermarket chain and Canada? Greeting from Toronto. Normally this should be a standard Android Reset, but all the answers say to enter the code. Try this https://www.google.com/search?q=LG+Imprint+MN240+hard+reset

6 Ways to Hard Reset an Android Phone [2023]

iMobie https://www.imobie.com > android-system-recovery The easiest way to restart Android is to press and hold the power button for a few seconds. This will usually be found near the top right of your device. But on ...

The USB socket is for reading multimedia USB Memory. Your phone has power in it. Not sure how that would work. Page 5 https://manualzz.com/doc/49428761/lg-lh-t7650x-owner-s-manual ..

It is possible to repair an LG Stylo 4 with a cracked screen that shows only a black screen to extract data from it. However, the success of the repair will depend on the extent of the damage to the screen and other internal components.

You can take your device to a professional phone repair shop and ask them to repair the screen. Once the screen is repaired, you should be able to access your data on the device. If the screen repair is not possible or too expensive, you may be able to extract data from the device by connecting it to a computer with a USB cable and using a data recovery software.

Note that data recovery software may not be able to recover all the data from the device, especially if the device has suffered significant damage. It's always a good idea to regularly back up your data to avoid losing important files in case of accidents or device failure.

Could be saving to a memory card!

Check settings to see where the photos are being stored!

There are a few possible reasons why your LG Env3 is only displaying the Verizon logo:

1. The phone is stuck in a boot loop: This can happen if the phone's software becomes corrupt, causing the phone to continuously reboot and display the Verizon logo.
2. The phone is stuck in a firmware update: If the phone was in the middle of a firmware update and the update failed, it may be stuck in a loop and only display the Verizon logo.
3. The phone has a hardware issue: If the phone's hardware has become damaged or malfunctioning, it may only be able to display the Verizon logo.
4. The phone is locked: If the phone is locked with a passcode or pattern and you've tried to enter it multiple times, it may display the Verizon logo.

If you're unable to fix the problem by yourself, the best solution would be to contact the manufacturer or the carrier to get the phone checked. It is also possible that the phone was previously owned by someone else, it may be locked to a carrier and the only option is to contact the carrier and ask for assistance

It needs repairing. It is a board or screen issue, https://www.fixya.com/support/r29790007-repairing_own_television ..

Aim the remote at the front facing selfie camera of your cellphone and press a button. Do you see a red flash? If not, change the batteries. https://www.google.com/search?q=lg+ht355sd-sw+its+not+sensing+my+remote ..

App fixes https://www.google.com/search?q=LG+6400+television.+Google+not+working+nor+the+App+store ..

If your LG classic flip phone is not able to call out or send text messages, there could be several reasons for this issue. Some of the common causes are:

1. Network Coverage: If you have recently switched to a different carrier, it is possible that your phone is not receiving adequate network coverage in your current location. Try to find a location with better signal strength.
2. APN Settings: It is possible that the Access Point Name (APN) settings on your phone are incorrect for the new carrier. Contact your carrier to obtain the correct APN settings and update them on your phone.
3. Phone Settings: Some phone settings, such as the network mode, may have changed during the switch to the new carrier. Verify that the settings on your phone are configured correctly for the new carrier.
4. SIM Card: The SIM card may have become damaged or is not compatible with the new carrier's network. Try inserting a new SIM card from the new carrier.

If none of these solutions resolve the issue, it is recommended that you contact the new carrier for further assistance. They will be able to diagnose the issue and provide a resolution.

Didn't you post about this a few days ago? I recognize the name. You just need to do a hard reset / factory reset, scrub it clean and reload the operating system. The new OS will have no passcode. https://www.google.com/search?q=LG+306+hard+reset ..