LG Radio Communications - Recent Questions, Troubleshooting & Support

If the LG Tone Infinim HBS900 is not pairing with your Apple iPad, there are a few things you can try to troubleshoot the issue:

1. Check the Bluetooth settings: Make sure that Bluetooth is turned on and that the LG Tone Infinim HBS900 is in pairing mode. To put the device in pairing mode, press and hold the power button until the LED light flashes blue and red.
2. Check for software updates: Make sure that your iPad has the latest software updates installed.
3. Check for other connected devices: Make sure that the LG Tone Infinim HBS900 is not already connected to another device. If it is, disconnect it from that device before trying to connect it to the iPad.
4. Check the distance: Make sure that the LG Tone Infinim HBS900 and the iPad are within close proximity to each other. Bluetooth devices typically have a range of around 30 feet.
5. Reset the LG Tone Infinim HBS900: Hold down the power button for 10 seconds, release, and then hold it down again for another 10 seconds.
6. Reset the iPad's network settings: Go to Settings > General > Reset > Reset Network Settings.
7. Check if the device is in pairing mode, if not activate it.

If none of the above steps resolve the issue, you may need to contact the manufacturer or a professional technician for further assistance. It's recommended to check the user manual of your device before trying any of the above steps, as the process of troubleshooting the pairing process can vary depending on the model and manufacturer.

resolder one in

have you replaced battery? 1. charger is not working 2. battery is bad.

Since a 3d movie takes way more bandwidth then a normal movie but have. you also tried it at night when all neighbours are sleeping

You can't use bluetooth headphones,

Believe this or not, I had the same problem. The fix... Cleaned out the ear wax from the hole that got packed in there on my first use. No kidding. Hope that solves our situation.

I am trying to figure this out also.

I moved your question from 'Computers', because our computer expert will tear you a new one if I left it there. All questions on Bluetooth need make and model for the two connecting devices. This will fix it though. Tip & How-To about Miscellaneous Pairing Bluetooth Devices Posters often ask "How do I pair my Bluetooth ???" Insert whatever device you have at the question marks. Generally, you need to read the instructions for the camera, headset, speakers or whatever the Bluetooth device is. Roughly speaking though. Settings - Bluetooth - Search, on the Android, iPhone, Windows phone whatever. With camera, speaker, headphones or whatever the Bluetooth device is, you have to press a button on that device to send out the signal. On my Bowers and Wilkins T6 Speakers, there is a button on the top with the Bluetooth symbol on it. This is the part people usually don't do and ask for advice, thinking it will do this automatically. When the Android device recognises it, click Pair, and if it asks for a code, the Default is '0000', (four zeros, no quotes). Posted by Andrew... on Nov 19, 2016

if check both voltage and current rating both are same no problem can connect

i have LG HBS 730 wireless headphones. When turning on they connect to my bluetooth and then just shut down. the battery is fully charged yet the headphones act as if it has a dead battery.

Take off the rubber earpieces and look down the holes to the speakers. Can't see the speakers? That is because there is a black sticker covering the hole. The sticker is actually a very fine mesh that is supposed to let sound through. But it gets clogged with earwax and other crud, which interferes with the sound. The mesh is probably supposed to protect the speakers, but what is the point if it kills the sound? I removed the mesh and my LG Tone+ sounds like new again. Maybe it will die a quick ***** from sweat and stuff, but I was going to throw mine away anyway, so even if it's living on borrowed time, I'm happy.

sould't be doing this

I called LG about the clips because I could not find them anywhere. I told them that I was looking to buy a few of the clips and they mailed me 2 of them for free in about 10 days. Hope this helps others looking for replacements.

change your headset :P

You need to replace the battery in the headset.

i had to find the stereos max address download a bluetooth direct app and use it and musicflow bluetooth simultaneously on moto z3 hope this helps

It is charged when the red light goes out. Press and hold the VOLUME DOWN button for one second and an audible will give you the battery charge level - high - medium - low.

just do the volume the equalization. Once the Bluetooth is on just click the volume (+) until you hear a beep then click volume (-) until you hear a beep, this should equalize your volume. and give you equal sound from both of you earbud.