Lexus Car Audio & Video - Page 5 - Popular Questions, Answers, Tips & Manuals
Reset button in kd-r426 and how reset
To reset your KD-R426, locate the reset button on the unit. This is usually located behind the faceplate. Once you've found the reset button, press and hold it for about five seconds. After a few seconds, you should see the message "RESET" appear on the display of your stereo. At this point, you can release the reset button.Your KD-R426 should now be reset and working properly. If you have any questions, or if you need help resetting your stereo, please consult your owner's manual or contact a qualified technician
Lasko silent room heater Model Number 5628
I apologize, but wiring diagrams for specific home appliances are not readily available to the general public. These diagrams are usually confidential and used by authorized repair technicians only. If you need to repair or replace the cord on your Lasko silent room heater Model 5628, I would recommend reaching out to the manufacturer or an authorized repair service for assistance. They should be able to provide you with the information and support you need to safely and effectively repair or replace the cord.
Radio won't turn up. Very low volume out of speakers
It sounds like you are having trouble with the volume on your radio. This could be caused by a few different things. To troubleshoot, first ensure that the volume knob on the radio is turned up to its max. If the volume is already turned up, then you should check the speaker wires to make sure they are connected properly and not loose or frayed. If the wires are secure, then you should check the volume control on your amplifier to make sure it is not set to a low volume level. If the amplifier volume is already set to a high level, then the problem may be with the radio itself and you may need to contact a professional for extra help.
Xtc No power but fuses are good what is the problem?
A possible issue could be a faulty power supply. In order to confirm, you can try plugging the power supply into separate power source to ensure that it is capable of supplying power to the unit. Additionally, the speaker connections may have become disconnected, so it would be beneficial to check the wiring in order to ensure that all connections are properly secured.
Valencia mp36 dont play cd . Walking for 2-3 minutes and no sound. How to fix it please
There could be a few possible causes for the CD player in your Valencia MP36 not playing CDs properly. Here are a few things you could try:
- Clean the CD. Dust, dirt, and fingerprints can all interfere with the CD player's ability to read the disc. Use a soft, lint-free cloth to gently clean the CD.
- Check the CD for scratches or damage. If the CD is scratched or otherwise damaged, it may not play properly.
- Check the CD player's laser lens. The laser lens is responsible for reading the CD and can become dirty or misaligned over time. If the laser lens is dirty, use a CD lens cleaner to clean it. If the laser lens is misaligned, you may need to have the CD player serviced.
- Check the CD player's connections. Make sure that all of the connections between the CD player and the amplifier or receiver are secure.
If these steps do not help, it is possible that there is a problem with the CD player itself. In this case, you may need to have the CD player repaired or replaced.
Been trying to hook up. Y performance teknique icbm-9707b can't seem to make it work it turns on then off it only makes a wishlsonose
I'm sorry to hear that you're having issues with your Y performance teknique ICBM-9707B. To help diagnose the problem, please provide the following information:
- What is the device supposed to do?
- What is the exact error message or behavior you are encountering?
- Have you tried troubleshooting steps, such as checking the power source or connecting cables?
- Is there any recent hardware or software changes made to the device or the environment it is used in?
Providing this information will help me better understand the issue and provide more specific advice to resolve it.
NHDT-W55 display works only reverse mode and there is no sound as well.
It sounds like your NHDT-W55 is having issues with displaying audio and video correctly. This could be caused by a faulty connection between the head unit and the speakers or a faulty wiring connection. To troubleshoot, first check all the connections between the head unit and the speakers to make sure they are securely connected. If the connections are secure, then check the wiring connections to make sure they are not loose or frayed. If the wiring connections are good, then the problem could be with the head unit itself and you may need to contact a professional for further help.
How to reset equaliser?when i turn up the volume the sound has too much bass. I fot JVC RX-5042 audio reciever .
To reset the equalizer settings on a JVC RX-5042 audio receiver, you will need to follow these steps:
- Press the "Menu" button on the receiver.
- Use the arrow buttons to navigate to the "Sound" menu, and then press the "Enter" button.
- Use the arrow buttons to navigate to the "Equalizer" option, and then press the "Enter" button.
- Use the arrow buttons to navigate to the "Reset" option, and then press the "Enter" button.
- Press the "Menu" button to exit the menu and save the changes.
This will reset the equalizer settings to the default values. If you continue to experience issues with the bass level when the volume is turned up, you may need to adjust the equalizer settings manually. To do this, follow the steps above to access the equalizer menu, and then use the arrow buttons to adjust the levels of the different frequency bands (bass, mid, treble, etc.) to your liking.
I hope this helps! If you have any further questions, don't hesitate to ask.
Cage/Holder FM & DAB reception issues
It sounds like you are having trouble with the radio and DAB reception when the head unit is in the cage/holder. This could be caused by either a faulty antenna connection or a faulty ground connection. To troubleshoot, first check the antenna connection to make sure it is securely connected. If the connection is secure, then check the ground connection to make sure it is properly connected to the chassis of your vehicle. If the ground is not connected properly, it can cause signal interference and reception issues. If these steps do not resolve the issue, then you may need to contact a professional for futher help.
My pure cd player keeps changing source to AUX. How do I stop this from happening.
If your Pure CD player keeps changing source to AUX, it may be due to a few different reasons. Here are some troubleshooting steps you can try:
- Check the connections: Make sure that the cables connecting your CD player to your speakers or amplifier are securely plugged in. Loose or faulty connections can cause interruptions in the signal and trigger the player to switch to AUX mode.
- Clean the input selector switch: If your CD player has an input selector switch, dust and debris may accumulate over time and cause the switch to malfunction. Clean the switch using a can of compressed air or a soft-bristled brush.
- Check the settings: Some CD players may have settings that automatically switch to AUX mode when no signal is detected from the CD player. Check your user manual to see if your CD player has this feature and how to turn it off.
- Reset the CD player: Turn off your CD player and unplug it from the power source for a few minutes. Then, plug it back in and turn it on to see if the issue is resolved.
- Contact the manufacturer: If none of the above solutions work, it may be necessary to contact the manufacturer's customer support for further assistance. They may be able to provide additional troubleshooting steps or arrange for a repair or replacement of your CD player if necessary.
Note: Before attempting any maintenance or repair work on your CD player, be sure to read the user manual thoroughly and follow any safety precautions.
Changing the stereo to English
'make model (what it is)' in all questions please.Googlemake model change radio languageyou can also use a smart phone with the Google Translate app on it and translate what you are seeing on screen.Also note that some units are for the Japanese domestic market and only come in Japanese.
Not finding what you are looking for?