Lexmark Logo

Lexmark Recent Questions, Troubleshooting Help & Support

  • 1K Products
  • 131K Answers

Microsoft Paint ----> 'File' -----> 'From scanner or camera' (while the Lexmark is in scan mode). Just tried it and it really works.

Lexmark X5470... | Answered on Apr 12, 2019

Instructions at http://support.lexmark.com/index?modifiedDate=11%2F21%2F11&page=content&actp=LIST_RECENT&id=TE413&locale=en&userlocale=EN_US
may help.

basically, disconnect all cables to printer. Unplug printer.
go get a cup of your favorite beverage. Plug printer to power.
See if it doesn't freeze.

you may also need to power-cycle attached computer

Lexmark Office... | Answered on Apr 09, 2019

I can provideyou with the procedures to default the printer. That may help.
1. start with the printer turned off.
2. Press and holde the GO, Select and the Right Menu Arrow buttons while turning the printer on.
3. Hold the button in until the display show "RestoringFactory Defaults" then let go.
4. The printer should come back to a Ready state.

Lexmark T630... | Answered on Apr 09, 2019

Try to unplug the interface cable from the computer and power up the machine. It is likely the RIP card aka the controller card.
There are two types of controllers for this printer, non-network and network. Here are links to where you can purchase them:

Lexmark T630... | Answered on Apr 09, 2019

Try downloading Update "Full" Programme. from Lexmark. Lexmark UK DRIVERS & DOWNLOADS. OS Compatibility Lists · Printer Drivers & Software · Lexmark Toolbar V.4 · Publications & User Guides ...
www.lexmark.co.uk/ - Cached - Similar
Markvision All-In-One Inkjet Contact Lexmark Return your Lexmark empty cartridge Lexmark Global Services Lexmark Genesis Colour Laser Printers Lexmark Toolbar V.4

Lexmark C533DN... | Answered on Apr 03, 2019

1.Turn the printer off.2.Open Front cover.3.Press and hold X button.4.Relese X when the ! LED is illuminated. Note:Be patient as the LEDs will light up in multiple patterns before finaly stopping at !.5.Close front cover. Note:Observe that green button and 3 other LED will be illuminated at the same time.This is Home position.6.Slowly press X button until the 3 first LED are illuminated (paper,toner,light)Note:normaly this will require you to press the X button 11 to 13 times depending on the options and features installed.7. Press and hold green button until all LED flasch or strobe from left to right then relese the button.wait until this process stops with the same pattern as step 6.8.Press and hold X until the light pappern return to the pattern of four LED in theHome position.9.Turn the printer OFF.10.Turn the printer On.Note:if on a DHCP network, wait 30 seconds to see if the DHCP server/router sends out an IP adress to the device.11.Press green button to print a setting pages and observe that all the TCP/IP settings have been reset.12.Reconfigure the device using DHCP.Auto IP(zero configuration) or the IP Setup Utility.
This is my solution to the problem.//Oaklunde

Lexmark E260dn... | Answered on Apr 01, 2019

If your Lexmark printer won't process print jobs, you may be encountering one of several issues. If your computer's print spooler service is not working correctly or not started, your Lexmark print is unable to receive print jobs. The printer may need power cycled to clear out the print job data or paper may be jammed within the printer.
Click "Start" and "Control Panel."
Type "Computer Management" in the Control Panel search box. Double-click the icon that appears.
Click "Services." Click "Print Spooler." Click "Restart" to restart your spooler service. Send your print job again to see if this fixed the problem.

If you are having any Kind of problems regarding your printer and have got stuck in resolving these issues then do not worry. Get connected with our Printer Customer Support Number +1 888 597 3962 and resolve all your issues instantly. We have an Expert and experienced team of technical professionals who can serve the best to provide you the best outcome for your queries.


Lexmark Office... | Answered on Mar 28, 2019

Your machine is most likely is gummed up. the silver shaft that goes through the carriers is sticky, needs to be cleaned. Or motor for carrier needs cleaned, Or both.

Lexmark Office... | Answered on Mar 27, 2019

You may have to change your WI Fi password to remove the ! and change it to a number instead. If you do this, however, every phone, PC etc that uses the wifi will also have to have its password changed otherwise it wont connect as it will look for the old password.

Lexmark... | Answered on Mar 22, 2019

I never thought that they will be a miracle on the internet until i came in contact with Priest Babaka, finally i made it with the help with his spiritual power which was recommended by a lady in baby center he help before, i never believe it was real until i confirm it now because i have tried so many things to make sure i get pregnant but no luck, immediately i contact him. he did some spiritual prayers and send me a medicine which i took, i got pregnant three weeks after, and i now have a son to show. thank you so much priest and i recommend Priest Babaka for everyone out there that is willing to have a child of her own out there. contact him for help too he is real and powerful, i have confirmed it, contact him on email: babaka.wolf@gmail.com or Facebook at priest.babaka

Lexmark Office... | Answered on Mar 18, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lexmark Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Damen Wong
Damen Wong

Level 3 Expert

1950 Answers


Level 3 Expert

84540 Answers

Are you a Lexmark Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides