Lexicon Logo

Lexicon Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 40 Products
  • 269 Answers
  • 39K Views

yes, it is possible. the first thing u shoul do is go to edit/preferences within audacity and make sure the alpha is selected as the recording source. if that isnt the problem, then contact lexicon directly. if they arent helping you very well, ask if "jamie cohen" is still supervising- he is the best with computer issues, if he still is a tech support supervisor there.

Lexicon Alpha... | Answered on Nov 30, 2010


Don't know what OS you're running. Omega has published drivers for Vista and 7 64-bit versions. They say they don't support XP 64, but when I hooked my unit up to my computer and the hardware install wizard came up the OS found and installed Microsoft published general USB audio device drivers for all inputs, midi, and mac USB channels of the Omega, and automatically set it as my default device. I hooked headphones into the Omega unit and could hear system sounds. So far so good. Went to My Music and fired up an audio file. Windows Media Player started up and the song started playing but I couldn't hear anything. Opened the same file with Audacity, could see the VU meters bouncing, but still no sound in my headphones. Went in to the preferences of Audacity, and manually set the speaker default to the Omega mac USB device. Hit play again and voila! I had sound. Closed the file, started WMP manually, went in to options, and again set the speaker default to Omega mac USB. Opened the same audio file and this time it played just fine. The driver files Windows used for my card were
C:\\WINDOWS\SysWOW64\ksproxy.ax, C:\\WINDOWS\System32\drivers\ks.sys, C:\\WINDOWS\System32\drivers\ksthunk.sys,
C:\\WINDOWS\System32\drivers\portcls.sys,
C:\\WINDOWS\System32\drivers\stream.sys,
C:\\WINDOWS\System32\drivers\USBAUDIO.sys,
C:\\WINDOWS\System32\ksproxy.ax,
C:\\WINDOWS\System32\ksuser.dll,
C:\\WINDOWS\System32\wdmaud.drv,
all version 5.2.3790.1830
Hope this helps everybody else with this problem.

Lexicon Omega... | Answered on Nov 27, 2010


Make sure you have NO antivirus/antispyware/antiadware or other resource hogging background programs running while processing the audio. These programs hog resources to the point that the buffering within the audio devices is overrun causing gaps.

Lexicon Alpha... | Answered on Nov 22, 2010


Sorry but... Very simply, you CANNOT use a condenser mic with the Alpha since it does not supply the required Phantom power for the mic. You must step up to another interface to use condenser mics. You can use dynamic mics with the Alpha or other audio sources. I use a Roland/Cakewalk UA25E interface with condenser mics and also the Lexicon Omega which does have Phantom power for the mics..

Lexicon Alpha... | Answered on Nov 03, 2010


try this cubase update:


http://www.steinberg.net/index.php?id=880&L=1

Lexicon Omega... | Answered on Oct 28, 2010


Try :
csupport (at) harman (dot) com
Theyre very helpful
I used to work there.

Lexicon MC-1... | Answered on Oct 09, 2010


Make sure you have Phantom power turned on on the Lexicon... Oh,oh... it appears that the Alphs may NOT have phantom power which IS a REQUIREMENT for most condenser mics...

The Lexicon Omega does have this but apparently the Aplpha doesn't have it.

That leaves you with the choice of either getting a dynamic mic that doesn't need Phantom, or replacing the Alpha, OR using a preamp ahead of the mic before the Alpha...

Sorry, but those are the only solutions I see for you.

REMEMBER that condenser mics pick up everything and you cannot run them into a PA or they will feedback.

Lexicon Alpha... | Answered on Oct 09, 2010


Buy a headphone amp at Daddy's or guitar center, connect from a line-out set of jacks in the rear,then dont use your power amp while the headphones are being used.

Lexicon MC-12... | Answered on Oct 04, 2010


download this manual and see your lambda interface will supported windows vista also i will give you are link download it and see

http://www.lexiconpro.com/product_downloads/8/manuals/Lambda_Install_Guide.pdf

Lexicon Lambda... | Answered on Oct 01, 2010


The solution is NOT to use this piece of **** indexing site that just loads questions from other sites and makes money via google ads

Lexicon Omega... | Answered on Sep 16, 2010


Send to Harman Specialities for service

Lexicon V4... | Answered on Sep 01, 2010


playback from the lexicon. Disable winamp as default player

Lexicon Lambda... | Answered on Sep 01, 2010


Hi you can't reset driver you need uninstall driver ( or roll back) and then install again. Regards

Lexicon Lambda... | Answered on Aug 24, 2010


A place called "The Service Bench" located in Massachusetts is an authorized service center for Lexicon. Contact them.

Dan

Lexicon MC-12... | Answered on Aug 23, 2010

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lexicon Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Tony Raia

Level 2 Expert

254 Answers

Marvin
Marvin

Level 3 Expert

84565 Answers

Are you a Lexicon Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...