Lexar Logo

Lexar Answered Questions & Fixed Issues

Do you work here? Claim your company

  • 88 Products
  • 317 Answers

You may need Administrator privileges on your computer.
Plug in flash-drive.
Allow time for Windows Explorer to read it.
Run AV scan if suspect.
To get a list of attributes:
Launch Start > Run > CMD.
From the command console enter
attrib F:
(or whatever the drive letter is for your flash).
to redirect output to a text file enter (example)
attrib f:>%homepath%\flashatb.txt
From the list you should see [H]idden, [S]ystem or [R]ead only attributes for write-protected files.
You can also do it via Win Explorer by right-clicking the drive icon.
Remove all above attributes.
As a last resort, you can full-format the entire flash via explorer.
Which should wipe all files / folders on the drive.

Lexar... | Answered on Jul 05, 2018 | 205 views

does the card contain important data? if not would formating it help? have you a computer you could plug the sd card into and see what windows makes of it?
check nintendo site and see if that helps.

Lexar... | Answered on Jan 29, 2018 | 161 views

Flash drives give notices like that when the files or system on them is corrupted. Put it in again, and select "fix problem" if that option shows up. If not, go to file explorer, find it and right click on it and click "format". (you will lose any files on it, but by this time probably anything on it will be useless anyhow.) If none of these work, you may need to buy a new one.

Lexar Computers... | Answered on Jan 03, 2018 | 165 views

USB flash devices don't need drivers. I believe you might have removed one or both of these drives from the PC without using the proper procedure, and the PC (or notebook) is now "confused". Re-attach one or both devices, but this time, either use (Windows) Explorer to "electronicaly" eject the device (right click, then choose eject) or use "Safely Remove Device" shortcut, usually on the bottom right=hand corner of your screen (the taskbar).

Lexar Media... | Answered on Sep 11, 2017 | 187 views

Reformat the drive to restore.

Lexar JumpDrive... | Answered on Aug 24, 2017 | 31 views

The H2TestW test program gives failures. That means that there are serius errors. Which errors does H2TestW give?
Try to reformat the FlashDrive. If that fails too, the drive is faulty and should be replaced.

Lexar FireFly... | Answered on Apr 28, 2017 | 893 views

There is a little tab on that unit that slides back and forth. If the tab is missing, you need to use a piece of scotch tape to simulate the tab.

Lexar... | Answered on Feb 10, 2017 | 1,617 views

plug the flash drive into a usb port
it will register on the desktop and will be recognized in the computer
and given a designation--- example:- drive h---
select what you want and save as --in h
or copy /paste to h
or if you have 2 screens click and drag to h in the computer section of the second screen

Lexar... | Answered on Oct 02, 2016 | 374 views

Yes. There is other 2 new updates.

Lexar LDP-200... | Answered on Aug 30, 2016 | 72 views

The chip inside that is used to store information went bad. There is no way to recover the drive.

Lexar 16GB... | Answered on Oct 18, 2015 | 89 views

There is a small tab on the card that you can move to change this.

Lexar Micro Sd... | Answered on Oct 04, 2015 | 141 views

Yes, it is possible to recover your files from lexar jumpdrive. see this step by step guide

Recover deleted formatted files from Lexar usb drive

you can use it to undelete your files from lexar jumpdrive.

Lexar FireFly... | Answered on Aug 20, 2015 | 580 views

Return it if it's under a year old - it may be a fake/faulty item.

Lexar Jumpdrive... | Answered on Aug 13, 2015 | 151 views

Please check this link. How to Use an SD Memory Card

Lexar... | Answered on Jul 15, 2015 | 257 views

Upload the files to the jumpdrive. Remove jumpdrive from computer 1 and insert in computer 2. When computer 2 recognizes the jumpdrive, copy the files to a directory folder where you want to save the music. Unplug the jumpdrive.

Lexar JumpDrive... | Answered on May 16, 2015 | 84 views


Lexar... | Answered on Feb 11, 2015 | 152 views

Either there's a little switch on the side, or the card has failed.

Lexar... | Answered on Feb 11, 2015 | 79 views

Probably because the files you are trying to play are not .MP3 files (an .MP# file has a name that looks like 'songname.mp3). Those are the only files your player recognizes and can play.

Lexar MDA256-100... | Answered on Feb 04, 2015 | 108 views

This is most likely a file format or digital rights management issue. Make sure the files are in a compatible format. The computer can play them because it is just looking at the player as a storage device and does not rely on it for playback.

If the files are .wma, try converting them to .mp3. Your device may have come with software that will perform this function for you.

Lexar MDA256-100... | Answered on Dec 05, 2014 | 89 views

Change the formar type to ext2 or ntfs if tour problems are file size related. If IT es because thw pen es full you will hace to deleite unwanted files.

Lexar Jumpdrive... | Answered on Oct 12, 2014 | 128 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lexar Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Lawrence Oravetz

Level 3 Expert

10528 Answers

Brad Brown

Level 3 Expert

18031 Answers

Are you a Lexar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides