Lexar Electronics - Others - Page 2 - Recent Questions, Troubleshooting & Support
Usb keeps ask for formatting why? please
On brand new USB disks sometimes, from value companies, they may require a formatting, I assume it is a new USB memory stick, allow it to format to "NTFS" if that is not an option let it format to "FAT32" Hope this helps.
I Have used one befor
When you put the usb connector end in a usb slot on your pc or laptop wait a few seconds and there will be a new drive letter. That will be your USB drive. Format it if you need to otherwise you can put pictures, video , music or any other fike you want to put on it.
I'm trying to recover 155 RAW photo images from my
you can try this
memory card recovery software called asoftech photo recovery that helped me before1. Do not save any new file to memory card.2. Connect your card to computer. You should see memory card shown as a drive letter (like H:) in My Computer.3. Download recovery software, recommended one is this photo recovery (simply because i was using it and it worked)
http://www.asoftech.com/apr/4. Install and open the photo recovery program, select your memory drive, and click 'Start' button to start scanning process which will find your deleted photos.
1/15/2014 1:33:49 AM •
Lexar...
•
Answered
on Jan 15, 2014
Decoding disc
Click Device Manager from the returned list.
Click Disk Drives from the list of hardware
Right-click the USB external hard drive with the issue, and click Uninstall.
After the hard drive is uninstalled, unplug the USB cable.
Wait for 1 minute and then reconnect the USB cable. The driver should automatically load
Check for the USB drive in Windows Explorer
12/31/2013 1:53:33 AM •
Lexar...
•
Answered
on Dec 31, 2013
Write protected
To remove write protection:
Open Start Menu >> Run, type regedit and press Enter. This will open the registry editor.
Navigate to the following path:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
Double click the key WriteProtect in the right pane and set the value to 0
In the Data Value Box, press OK
Exit Registry, restart your computer and then re-connect your USB pen drive to your computer.
Service centre india
hai,my lexar cf card 32 gb not regaconicse my canon mark 2,3,and card reader at system also ,any possible to replace it
12/24/2013 5:16:46 AM •
Lexar...
•
Answered
on Dec 24, 2013
When i try to delete something it wont delete
Assuming you are connecting these to a computer to delete stuff.... Once you open the drive right click the file or folder you are trying to delete and choose properties. Once properties opens you will see "read only" make sure the box is not highlighted or checked ... if it is un-check or UN-highlight it by clicking the box. then try to delete the file. Hope that helps.
11/26/2013 3:12:43 AM •
Lexar...
•
Answered
on Nov 26, 2013
I pulled my 2 GB JD lexar firefly out without
you can recover the data by steps blow1. Do not save any new file to memory card.2. Connect your card to computer. You should see memory card shown as a drive letter (like H:) in My Computer.3. Download data recovery software, recommended one is asoftech data recovery (simply because i was using it and it worked)
http://www.asoftech.com/adr/4. Install and open asoftech data recovery program, select your memory drive, and click 'Next' button to start scanning process which will find your data.
How to unlock memory card
Look on the side of the card, there is a switch. Just slide it and you will unlock your card.
12/31/2012 5:22:28 PM •
Lexar...
•
Answered
on Dec 31, 2012
Not finding what you are looking for?