Lenoxx Electronics Answered Questions & Fixed Issues

Likely a bad backup battery inside the clock, or a capacitor that is leaking a charge.

itll be the lens on the player clean it with surgical spirit

You need to open it up to check the parts inside. First look around to see if there is any plastic parts that are damaged. This might account for the noises inside. If you can not see anything wrong. Get a magnifying glass or lens and look at the lazer lens. Make certain the power is NOT on for any of these tests. If you see any odd light patterns or damage on the lazer lens it will not play discs. Unless it was an expensive model it will not be worth repairing if the lens is damaged. Do not open the unit if the model is still under warranty. In which case contact the maker of the unit.

the latch inb the back of ther speaker Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/tony_a41fa0b801734e2f

There is a latch on the middle back Tony Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/tony_a41fa0b801734e2f

Eu comprei um dvd deu problema duas vezes co um mes de uso , agora depois de usar um ano da o mesmo defeito , liguei no 0800 a pessoa so falou que passou da garantia nao me deu outra explica??o fiquei muito desapontada com um atendimento de uma empresa que serve seus clientes ,cliente este que fica lesado com a falta de iniciativa da empresa nao da importancia a uma reclama??o nao indico para ningu?m essa marca ,pela falta de interesse da empresa em tratar seus clientes.

Does the back of the CD player use either of these cords? If so you can find them right here 483results for PS2 power cord or 28results for PS2 fat power cord

Does the back of the CD player use either of these cords? If so you can find them right here 483results for PS2 power cord or 28results for PS2 fat power cord

Do you think any of these would work? 5results for ghetto blaster replacement antenna

There is a pretty good chance that this boombox uses the same plugs as sony so you should check their PS2 fat cables and their PS2 power brick cables to see if any of those match. Ps2 power cords

Radio Shack sells about half a dozen different power cords. I am not familiar with the Lenoxx cord specifically, but it is a good possibility that they carry one that will work.

A universal Remote from a company such as Logitech, Tandy or Radioshack.

There are about six common cords that fit most items, Radio Shack is a good place to start and most TV repair shops carry power cords

HelloCompare these power cord pictures and get it from any electonic spare part selling shops at your town. It is an easly available part. OK.

HelloThe sled motor of your player is not working. This is the motor that spins the disc inside as soon as it has been loaded. But to spin disc, the disc must be loaded properly into the loading mechanism. Just check the loading belt that attached with loading motor and loading gear set for any loose, which may cause improper disc loading. Replace it first. If it does not help you, check the voltage at the seled motor terminals. There must be a voltage [4.5VDC approx:]. If the voltage is there and still the sled motor does nor work, replace it. If voltage is not there, the fault is with the loading IC which is soldered to the main board of the device. OK>

You will need to check the swith that change from Tape to CD to other functions. If the switch is good. Then the next thing is to check for tape function. Can you try to fast forward, reverse. If these functions are working properly then the pinch roller ( the little wheel that is pulling the tape need to be replaced). If nothing moves then you need to replace the belt and the wheel and possible the motor at the same time

You can find the power cord on the link belowhttp://www.studiosoundelectronics.com/pwrcords.htm#pwrcords

Check for broken or stretched rubber drive belts. Age is as bad an enemy as wear. If it has been sitting for a period of months they go bad faster. Even if you keep it indoors out of the heat, the A/C will dry out the oil the belts and they wil lose their elastisity. There are usuallyonly about 3 or 4 belts in the cassette player at most and they cost less than a dollar each. If you can find the belts, buy extras and keep the extras in a zip lock bag. Parts are harder to find as time goes on and most manufacturers will deliverately quit selling normal wear items like belts after a few years to force you to buy a new product.

Typically these system have two belts, one that runs from motor to pinch roller and the other to the side where it pulls the cassette.You can order belts on this site http://www.studiosoundelectronics.com/cassette.htm

http://www.studiosoundelectronics.com/cassette.htmYou can remove the damaged one and measure it and this site on the link above provides generic replacement