Leeson Tools & Hardware - Others - Page 3 - Recent Questions, Troubleshooting & Support

Here is the manual. It is also called a Cobra To load nails,turn gun upside down and tilt the gun so the side with the nail icon "T" and staple remaining window is facing down (Fig. 3). Load by leaning rack of nails tight against inside of staple chamber in housing (Fig. 3). Be sure to insert nails with point of nail facing upwards. The gun may jam if nails are inserted in the wrong side of housing. https://www.manualslib.com/manual/794561/Cobra-8000.html?page=4 ..

try this copy and paste https://www.manualsdir.com/manuals/590139/watts-r4x40-3-r4x40-2-r4x40-1.html?page=9

To fix an Apsco 17 stapler with a detached spring, you will need to reattach the spring to the stapler. Here is a general process you can follow to do this:

1. Unplug the stapler and lay it on a flat surface.
2. Locate the spring and the area where it attaches to the stapler. This may be near the back of the stapler or on the underside.
3. Using a small tool, such as a flathead screwdriver or a pair of needle-nose pliers, gently pry open the area where the spring attaches. This will allow you to access the spring.
4. Hold the spring in place with one hand, and use the other hand to carefully attach the spring to the stapler. Be sure to align the spring with the correct attachment point, and apply gentle pressure to secure it in place.
5. Once the spring is reattached, test the stapler to make sure it is functioning properly. If the stapler still does not work properly, you may need to consult a professional repair technician for further assistance.

scrape, sand, Prime with an acrylic primer ,skim texture and top coat or call a professional

Not available anywhere, but there is a similar lathe from Craftsman. https://www.google.com/search?q=Tradesman+8232+manual ..

wall paper patterns change with the fashion and times it is unlikely that you would get the pattern off the net as the pattern would be continually updated I would try face to face with wall paper/ decorator shops with a good photo of the pattern as they may still have the pattern books somewhere in storage

check amp draw ---possible circuit--bearing[s] --motor overheating

Hi, I'm seeing that that product use at least 1/4,1/2 and 9/16 inch staples. You can confirm this with craftsman by calling them at (888) 331-4569 . Thank you.

No Parts available Juanita. Just buy a new one for $12! https://www.google.com/search?q=hyper+tough+heavy+duty+hand+staple+gun+parts ..

Question edited for clarity. make model (what it is) Question moved from Office Equipment. So secretive, they won't tell you! E 24 E 25 E 27 E 50 Switch off unit! Notify Customer Service. Page 39 refers http://begocanada.com/wp-content/uploads/2018/04/Fornax-T-Manuel-utilisateur-86067-EN-Serie-359.00377.pdf Not in the Service Manual either, stops at E27 http://www.medteh.info/_fr/103/Service_Manual_.pdf .. ..

Question moved from Cars and Trucks Contact them and get the machine serviced. https://www.lelo.com/contact-us ..

ask maker this. (or seller) the lathe came with a manual , lost that/ and on the last page it shows contacts list , read that ? or google for makers support. moved you out of cars to tools.

Hi David,I have searched for this this manual and this is what I have come up with.Campbell Hausfeld own the Husky brand.This link is for an IFN2190 which may be the HFR2190 rebranded as "Iron Force". The specific HFR2190 manual doesn't appear to be available.http://powertool.manualsonline.com/manuals/mfg/campbell_hausfeld/ifn2190.html?idRes=1235852If it doesn't suit your nailer you can cancel the $12 feeHope this helps.

what color is the light when you insert battery? then what color is it when you try and fire the tool? you could have a couple problems, first does the light even come on? If not the battery contacts might be bad. second you got light but no fan, could be a spark plug wire, bent lower probe circuit board bad and lastly bad fan motor. Let me know about the lights first and we will go from there

It sounded good but made no sense. How do you remove the trigger/ squeeze handle assembly? This thing (Stanley TR70) is riveted together. The only piece that is removable is the staple feed tray.

clean the tool completely may fix it.

For parts this old, I start out looking on ebay by the part number and brand. If that falls through, I look for the whole product on ebay because there might be one cheap enough to strip a part from. Fact is, I don't find the part elsewhere on the web, even in part replacement sites. You might contact customer service at Kango or Milwaukee Tools but such is a long shot. Here is what ebay offers: kango 750 rotary hammer: Search Result ' eBay