Leeson Answered Questions & Fixed Issues

Do you work here? Claim your company

  • 15 Products
  • 19 Answers
  • 3K Views

check input voltage check to see if its the proper phase check tension on belts, gear, or connection from motor

Leeson... | Answered on Mar 05, 2015 | 316 views


If the motor is a 115/230 volt motor and is running on 115 volts but the wiring is configured for 230 volt operation, the motor will be weak.

Leeson Table Saw... | Answered on Apr 18, 2014 | 98 views


If it has 9 leads and is a 240/480 volt motor the 1and 7 go to line 1. the 2 and 8 leads go to line 2 and the 3 and 9 leads go to line 3. the 4 5 and 6 leads are hooked together with a wire nut. To reverse rotation simply reverse any 2 of the line leads.. Prairie Dog........

Leeson... | Answered on Nov 15, 2012 | 225 views


It will not run. With only one wire hooked to both leads there is no potential and no place for the current to flow to. electric bruno.

Leeson... | Answered on Jun 17, 2011 | 161 views


It depends on what type of account, but if this is your credit card, call the 800 number on the card and report an erroneos charge, they will ask you a series of questions, like, have you contacted the business that has charged your card and tried to reslove it with them. If this is a bank account or checking account you need to conact your bank, you will most likely not get any money back if it was taken from your checking or debit card account. that why it is best to always use a major credit card.

Leeson... | Answered on Mar 23, 2011 | 62 views


03623x01.png


Here is a diagram the contactor needs a 120Volt supply & switch too.

Leeson... | Answered on Feb 15, 2010 | 146 views


it is possible that the start/run winding is open cicuit or cable connections via the capacitor you mentioned , is it distorted , any sign or leakage . as it is on a stair lift the motor has to be reversed , is the reversing switch intact.

Ian c

Leeson... | Answered on Jan 27, 2010 | 213 views


should be a wiring diagram on the wiring cover.

Leeson... | Answered on Oct 26, 2009 | 491 views


MOTOR SHOULD HAVE A RESET BUTTON.
IF U CAN FIND IT, HOLD IT IN-IF MOTOR RUNS
RESET MAY HAVE TO BE REPLACED.MAKE
SURE MOTOR DOES NOT OVERHEAT UNDER
LOAD-THIS MIGHT BE THE PROBLEM.

Leeson... | Answered on Jun 21, 2009 | 101 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Leeson Experts

DavidPerich

Level 2 Expert

272 Answers

RURC

Level 1 Expert

18 Answers

Are you a Leeson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...