I have Delco Model 2J2424r1, frame 56R, Series
If it has 9 leads and is a 240/480 volt motor the 1and 7 go to line 1. the 2 and 8 leads go to line 2 and the 3 and 9 leads go to line 3. the 4 5 and 6 leads are hooked together with a wire nut. To reverse rotation simply reverse any 2 of the line leads.. Prairie Dog........
6/15/2011 10:46:50 PM •
Leeson...
•
260 views • 0 helpful votes
What happens to a 240v
It will not run. With only one wire hooked to both leads there is no potential and no place for the current to flow to. electric bruno.
6/6/2011 9:23:02 PM •
Leeson...
•
185 views • 0 helpful votes
My account been change what do ido
It depends on what type of account, but if this is your credit card, call the 800 number on the card and report an erroneos charge, they will ask you a series of questions, like, have you contacted the business that has charged your card and tried to reslove it with them. If this is a bank account or checking account you need to conact your bank, you will most likely not get any money back if it was taken from your checking or debit card account. that why it is best to always use a major credit card.
3/23/2011 1:52:04 PM •
Leeson...
•
76 views • 0 helpful votes
I have a 3/4 HP motor installed on my porch
it is possible that the start/run winding is open cicuit or cable connections via the capacitor you mentioned , is it distorted , any sign or leakage . as it is on a stair lift the motor has to be reversed , is the reversing switch intact.
Ian c
12/21/2009 3:04:44 AM •
Leeson...
•
245 views • 0 helpful votes
3450rpm motor
MOTOR SHOULD HAVE A RESET BUTTON.
IF U CAN FIND IT, HOLD IT IN-IF MOTOR RUNS
RESET MAY HAVE TO BE REPLACED.MAKE
SURE MOTOR DOES NOT OVERHEAT UNDER
LOAD-THIS MIGHT BE THE PROBLEM.
6/21/2009 2:50:46 AM •
Leeson...
•
128 views • 0 helpful votes
Not finding what you are looking for?