Leapster Toys - Page 2 - Recent Questions, Troubleshooting & Support

buy.buyntradetoys.com/wp-content/uploads/2013/.../Leapster-Manual.pd. See if the answer is in the (above) manual.

If your Leapster 2 will turn on, but the touch screen is not responding to the stylus, try re-calibrating the stylus with the screen using the steps below: 1. Turn your Leapster 2 off, and remove the game cartridge.
2. Hold down the 'hint' button while the game is off. The 'hint' button is the middle small button in the row of three above the directional pad on the left, with a '?' on it.
3. With your finger still firmly on the 'hint' button, turn the Leapster 2 back on. Keep your finger on the 'hint' button.
4. The screen should be displaying the calibration screen. You can release the 'hint' button now.
5. Press the 'A' button on the right to enter the calibration screen.
6. A small '+' sign will appear on the screen. Touch it with the stylus. A new '+' sign will appear. Touch this with the stylus too, and repeat for as many '+' signs as your Leapster 2 throws at you.
7. The screen will return to the calibration screen. You can now turn the machine off. Leave the cartridge out of the console, and turn it back on.
8. Your stylus and touch screen should now be working, enabling you to sign in as usual.
9. If it is working correctly then you can turn it off, add a game cartridge and turn it back on
Thank you for using fixya! I hope I had helped you with your problem. May you have a good day!

Take it back to the store for a refund... go Motorola .com/motomaker

Buy more music at app center at leapfrog.com

are the batteries you are using the correct size/voltage for the leapster? I believe it takes 4 AA/LR6 size batteries at 1.5V each.
has the product been dropped or bashed?

Go to Google.com with your browser, then select Tools, Options, General tab, "Use current page".

Bought one used. Need to change names. plug up to computer to try and it installed driver but it won.t open up. Leapster screen says "Do Not Disconnect" Don't know what to do!

I need to change names. I hooked it to computer, iT DIDNT OPEN UP EVEN THOGH IT SAID IT DOWNLOADED DRIVER. The screen on Leapster says Do Not Disconnect. I dont know what to do

only if you go into Administrator and add an account..ask your admin..

If the cartridges can be removed, pull them out and try spraying an electronic contact cleaner, power off, and make sure it is safe for plastics, onto the cartridge pins. Then, Gently, slide the cartridge in and out of the socket several times to clean both the socket and cartridge. May have to do this a couple of times.