Were can i get free
JUST GO TO WWW.TOGGLE.COM OR TO WWW.4SHARED.COM...YOU CAN FIND YOUR FREE SOFTWARE ON THAT WEB PAGE,,,
I am running windows 7
You shouldn't need drivers for this camera, just plug it in and it will open a window to the camera memory. Alternatively, remove the memory card from the camera and insert it into the card reader in your pc or printer (if they have one).
Hope this helps.
How do i get copies printed ? thanks
bring it to a store such as shoppers zars wallmart rexal most of these places will have photo centres or if you have a printer witch can be used for picters read the owners manual witch will tell you every thing
I need software
Firstly you try to recover your data in your computer if you have any problem to do this so connect on this site and get your camera driver and software.
www.dotsis.com
When i am connecting the
Hello
Please try buying a USB adapter. It costs about $10 and is much easier to use and you don't need any software.
Kind Regards
Andrea
Deleted pictures by accident
Hello
Please download Disc Digger HERE.
This is a free tool you can use that works very well and there is no
installation required, just run the program once you downloaded it.
Once
you have connected the memory card to the computer via either the
camera or preferably with a usb card reader , run the program.
On
the program , select the dig deep option for accidentaly deleted files
or dig deeper for a formatted card. Then select the card you want to do
the recovery on and run the program.
The data will be displayed
and you can recover it from there. This will only work if the card has
not been used since the pictures were lost. Save the files to a location
on the computer hard drive and not back to the memory card as this will
overwrite the other pictures that still needs to be recovered.
Some of the properties of the files may become lost in the recovery but the pictures should be fine.
Feel free to ask if you need more assistance.
Kind Regards
Andrea
I need the software and
Ok, well that's quite correct, however downloading and installing the drivers, first, should then enable communications between the two. Once this is done, then you could update.
So download the drivers, and install, then reboot, then and only then plug in the camera. It should be detected and install itself, then reboot, still connected, at next desktop, now, you can do whatever you wish.
I get: "There are not enough free disk space.
it wants you to delete old pictures because the memory (card or internal) is full.
you can either delete some pictures / videos or you can transfer them to the computer, and remove them from the camera.
Another option would be to buy a new (possibly bigger) memory card such as SD i believe for this camera, if you post the camera model i can tell you the exact type of card you would need.
post here if you need more help.
-mike
I have an older camera and I installed the cd.
go to control panel, system, hardware, manager device and update from there the camera driver , how to update? , justo click right on icon and choose udpdate insert the cd and fallow the instructions
Mega+ 2 digital camera usb link error
Hi there,
Well first of all you can try to connect some other USB device to your computer, if the other device works fine then there must be some problem in your USB cable and you need to change them.
Else there is some problem in operating system of your computer, please follow the below steps to resolve them -
1. Right Click on My Computer, click on Properties
2. Click on the Hardware tab.
3. Click the Device Manager button.
4. Expand Universal Serial Bus controllers section.
5. Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
6. Restart the computer, and allow the computer to reinstall the USB controllers.
7. Plug in the removable USB storage device (your camera or something else), and then test to make sure that the issue is resolved.
Good Luck!!
Thanks for using FixYa!!
Program locks when I try to download camera pictures
Hello. Take the camera to any good camera shop that does repairs. Tell them that you want the pictures transferred to a disk or a speed stick. They should have the capability to do that and also repair your camera. J.
Cant get pics to computer
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive.
Not finding what you are looking for?