Lanier Logo

Lanier Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 130 Products
  • 614 Answers

Simply touch the desired tray on the touchscreen before copying.

Lanier Ld425b... | Answered on Oct 26, 2014

The LD-620 appears to be a Ricoh Aficio MP-C2051 or C2551.
You should be able to find a parts list on the net. Whichever one looks the same as your lanier (who don't make anything) will be the one.
Good luck

Lanier Office... | Answered on Oct 03, 2014

Hey there "Lanier" do you still have the Hiccups ? if so, I will tell you how to get rid of them in 30 seconds.

get a medium size glass (10-12oz) fill it to about 1" full from the top, now while standing up, drop your head down put the glass to your mouth so that your trying to drink off of the opposite side of the glass than you normally would, so that your chin is actually in the glass and so the bottom of the glass is going back towards your chest, now as you slowly bend forward from your waist, start drinking the water out of the glass, (its like your trying to take a drink in the opposite fashion that you normally would) . Now you might spill a little but its ok, you only need to drink a small amount of water, now when your bent over and have had a few swallows of water, keep your head bent down for 10 seconds or so and now stand back up and pour the rest of the water down the sink because your Hiccups are gone.

Here is why this works, (it's actually a biological plumbing thing) the " Hiccups " are nothing more than an air bubble in your digestive system, so by bending over and drinking the water in this fashion, it lets the water run into your system and the air bubble to escape over the top. ( BTW my dad taught me this trick in 1965 and I've cured a million cases of Hiccups, plus I've won a lot of money in the bars showing people how to do this ).

You can thank me later...

Lanier UNKNOWN | Answered on Sep 29, 2014

you may need a new washer in the tap

Lanier UNKNOWN | Answered on Aug 29, 2014

Very, very common issue on these normally related to a problem in the toner hopper assembly itself.

Lanier Ld328c... | Answered on Aug 24, 2014

Heat roller error

Lanier Office... | Answered on Aug 23, 2014

Laser sync error, bad mirror motor?

Lanier Office... | Answered on Aug 23, 2014

Not enough info, nice little printer, service call?

Lanier Ld 425c... | Answered on Aug 23, 2014

after refill the toner may be bias charging roler is not proper fiting
or toner cartridge is not proper insert

Lanier Ld445c... | Answered on Aug 19, 2014

From the Ricoh-Lanier Error Code Sheet:
SC302: Charge Corona Output Error 3 - Grid Voltage error - Charger Roller Current Leak.

I would suggest replacing first the charge roller and if that doesnt fix it, the HIgh Voltage Supply Board.

Lanier 5222/27... | Answered on Aug 12, 2014

Try neutral if it doesn't start there then your lever and P R N D L are out of sync. You could also try pulling the little plug out of you consul and pushing down with a thin screwdriver on the switch in there then turn on the ignition switch if it starts then it's your neutral safety switch that has to be replaced by the dealer or a good shop that you trust. It should still fall under the vehicles warrenty though.

Lanier UNKNOWN | Answered on Jul 18, 2014

The replacement fuser may have failed.

Lanier Office... | Answered on Jul 10, 2014

please clean the sensors located in the RADF and power the machine and the problem is over

Lanier 5222/27... | Answered on Jun 13, 2014

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lanier Experts


Level 3 Expert

904 Answers


Level 2 Expert

422 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a Lanier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides