Lancaster Answered Questions & Fixed Issues

go online to manufacturer and get their specs good luck Neil

Find it or replace it .

pull the crown out to second position then press start button till it goes to 0 then push crown back in..........

Took several emails but I finally got the PDF.

80 psi wow1]shut off pump2]drain all water from tank3]close drain4]turn on pumpfix pressure switch 80 psi is wayyyyyyy to hightank is bad this is a temp fix worked 4 me

Hey, sorry I don't have a solution, but a question! Do you still have the manual?? I have the same maker and woudl like some advice on making 90 cups of coffee before I have caffeine deprived angry guests on my hands.

Pull out to the "winder" to the first click. this is to change the date. The second click is to change the time.

Changing the date - rotating the winder (if you were looking at it) in a clockwise directions changes the major decimal - the number on the left e.g. 0, 1, 2, 3. Rotating anticlockwise changes the lesser decimal - the number on the right e.g. 0, 1, 2, 3, 4, 5, 6, 7, 8, 9

Hope that helps.

Hi, am sure that all it needs is to be cleaned. Gently take it apart, clean the parts, use a soft brush if needed and put it back together and if it still leaks, it is advisable to replace it....

Hello. Go directly to the manufacturer at these contacts:

Lancaster Colony Commercial Products Inc.
P.O. Box 630
Columbus, Ohio 43216
Toll Free 800/292-7260
Canada 800/528-2278
614/263-2850
FAX 614/263-2857
www.lccpinc.com
[email protected]

Try "www.lancasteritaly.com".

Read all about leather straps in my tips.

I brought mine online from http://www.ernestjones.co.uk/webstore/browse/N/65+4294967253

You are better off getting your watch from a credible supplier like Ernest Jones as they come with a guarantee..

You should go to a diamond store and ask if they can do that for you .Your welcome.