Labtec Audio Players & Recorders - Answered Questions & Fixed Issues
What's the part number for the operational amplifier ,DC 15dc of LCS 1024
why not photo the IC, and show that.
for 10x better answers.
not told what car is came out of or what the OBJECT did. (PCM/ECU/BCM ,etc?) <<< vast on cars/trucks\
many PCB or Modules the ICs are some or all , contract parts
and the number on top is secret contract Part number.
ahhhhhh it is not a CAR at all it is
LABTEC LCS-1024 AMPLIFIED COMPUTER SPEAKERS
moving you now to computers stuff
12/13/2022 1:50:05 PM •
Labtec Audio...
•
Answered
on Dec 13, 2022
•
36 views
Can you hook up a Labtec 2424 sub to a smart TV
If you are looking for the top security companies in London that provides its customer with remarkable security services. Check out this site for security services https://www.urbansecurityguards.co.uk
6/2/2020 5:39:54 AM •
Labtec Audio...
•
Answered
on Jun 02, 2020
•
168 views
I have some Labtec speakers
According to the specs your speakers are intended to use a standard 3.5 mm stereo headphone jack. I doubt your new Macbook will not be equipped with such a jack socket and so if they don't work when plugged into the headphone jack of the Macbook but do work in the headphone jack of the PC it is clearly the fault of the Macbook - maybe the socket is faulty or hasn't been enabled or something.
Sorry but I know nothing about Macintosh other than I hear they are almost entirely interchangeable with Windows these days. If they don't have a headphone socket it would seem they are actually inferior rather than the superiority they claim.
I had windows xp with
Try this one
http://download.cnet.com/Realtek-AC-97-Driver-Windows-Vista-Windows-7/3000-2120_4-10962344.html
Labtec lcs 150 disassemble
Three screws (each speaker). One visible in the rear at the top, two more hiding in the battery compartment. Good luck. Broken wires can be re-soldered. Speakers may be replaceable (though in this disposable age your sources are drying quickly). Otherwise, off to Amazon for new speakers.
Hiw many mA does the adapter for labtec lcs150 speakers need
6V DC 200 MA; plus shell, minus center pinaka, Panasonic AC Adapter Model No. RP-65A or equiv..You want to make sure the plug at the speaker end is wired properly: + on the outer barrel and minus on the center pin (the adapter will have a little graphic for verification purposes). If so, your 500ma adapter should work fine. The voltage might be a little high but nothing the speakers cannot handle I would think.
Not finding what you are looking for?