La Crosse Audio Players & Recorders - Recent Questions, Troubleshooting & Support
Projection display blinking
YES! I also have the same issue - I ASSUMED that it was the RED LASER BLINKING behind the PROJECTED time (on the wall/ceiling), but a different brand with a similar problem was described as actually a PROJECTED RED LED, NOT A LASER. In either case, still not sure what the problem is. ;(
To RESTATE the ISSUE for NEW READERS: These digital alarm clocks (with AutoSet through radio signals) project the time in red color on the wall or ceiling. HOWEVER, after some time, the PROJECTED RED TIME begins to flash or blink INTERMITTENTLY - this is NOT a setting issue. The flashing/blinking projection is totally intermittent, occurring every 0.5 to 6 seconds, randomly, leading me to believe it COULD be broken/cracked soldering contact points (which presumably could be fixed by resoldering those contact points on the circuit board), OR perhaps some issue with the internal chip (which would NOT be fixable by a DIYer, I would assume). ANY THOUGHTS?? Thanks!
5/20/2022 3:29:02 AM •
La Crosse...
•
Answered
on May 20, 2022
Where to put outside remote
If you have storm windows, put it between the window and the storm window.
Or try just below the overhang of your house.
2/25/2019 2:54:18 AM •
La Crosse...
•
Answered
on Feb 25, 2019
Remote signal not received by Shift 3 projection alarm clock
1) Does the remote have batteries? See other posts that describe how to do this (4 screws in back need to be removed). Temperature should be displayed in small window of the sending unit if it's working.
2) Hold Channel button for 3 seconds until it beeps - the unit then searches for a signal.
12/16/2018 12:04:35 PM •
La Crosse...
•
Answered
on Dec 16, 2018
Not finding what you are looking for?