La Crosse Logo

La Crosse Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 94 Products
  • 542 Answers
  • 80K Views

You may download a copy of the manual at http://www.lacrossetechnology.com/9047itc/manual.pdf

It's a PDF file so your viewer should be able to magnify it to just about any size you want.

La Crosse... | Answered on Dec 31, 2014


Make sure they are both set to the same channel (normally channel 1) put them next to each other then press reset on the temperature unit only.
www.serendipity-gifts.co.uk

La Crosse Radio... | Answered on Dec 28, 2014


If you have not talked to La Cross and if you continue to have the problem, most likely it may be a signal problem. I had a similar
problem with an earlier model and found that it only worked on
the west facing wall as the signal is coming from WWVB which is the NISTtime signal radio station near Fort Collins, Colorado. Get a fresh battery, reset the clock, put it in a west facing window and leave it overnight. If it doesn't work, contact La Cross as above post.

La Crosse Radio... | Answered on Dec 24, 2014


http://www.lacrossetechnology.com/eh23sa/manual.pdf Hi Bill click link this will explain in detail your question i think you will find it is automatic and sets itself ..but check instructions will tell you hope this helps

La Crosse... | Answered on Dec 23, 2014


http://www.manualslib.com/products/La-Crosse-Ws-8256u-2940322.html

Hi Vickie....try this....good luck to you.
Regards,
Dennis

La Crosse... | Answered on Nov 17, 2014


Is the picture the type of clock your referring to? If so you cant set the time zone on that type of clock. You can change the time though.

La Crosse Radio... | Answered on Nov 05, 2014


I'm not totally sure what you mean by "reset the time" because the unit normally sets the time automatically from the WWVB radio time signal. If you want to do it manually, this is what the Instruction Manual (PDF format) says:

MANUAL TIME SETTING

In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.

  1. The hour digits will start flashing in the upper LCD.
  2. Select the desired hours by pressing and releasing the + key.
  3. Press and release the SET key to advance to the minutes setting.
  4. Now the minute digits will start flashing.
  5. Select the desired minutes by pressing and releasing the + key. If the + key is held, the units
    will increase by 5.
  6. Press and release the SET key to confirm the Time setting and continue to the Year setting.

La Crosse Radio... | Answered on Nov 05, 2014


these really aren't atomic clocks and are set at the factory. It receives, it's LF signal out of Colorado and should correct itself. If not contact the manufacturer.

La Crosse Radio... | Answered on Oct 29, 2014


Based on a different, but similar, LaCrosse model (the WS-8611), it would appear to be an OverFlow indication, meaning that it's out of range. Here's a quote from that unit's manual:

SPECIFICATIONS:
Temperature measuring range:
Indoor : 14.2F to +139.8F with 0.2F resolution
(-9.9C to +59.9C with 0.1C resolution)
("OF.L" displayed if outside this range)
Outdoor : -39.8F to +139.8F with 0.2F resolution
(-39.9C to +59.9C with 0.1C resolution
("OF.L" displayed if outside this range)

It is likely that their convention remains the same across models, but I don't work for them, so I can't guarantee it.

La Crosse... | Answered on Oct 13, 2014


I think we're not talking about a WT-3101. What model is YOUR clock?

This site lists several including some desk models on two pages and each has unique downloadable instructions.

http://www.klockit.com/depts/AtomicClocks/dept-52.html

La Crosse Radio... | Answered on Aug 29, 2014


You're not supposed to set the time -- it's supposed to synchronize with the US atomic clock broadcast automatically. Perhaps putting it in a different area of the house, or turning it to a different orientation will help it make the initial connection.
If it still won't, here are instructions from one of the LaCrosse models... use them or go to http://www.lacrossetechnology.com/clocks/atomic-digital/wall/
and find your particular clock, then download the instructions.
------------
MANUAL TIME SETTING
In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock. Note: In 12 hours mode the time will be displayed with an additional "PM" for the time from 12:00 noon until 11:59.
1. The hour digits will start flashing on LCD1.
2. Set the desired hours by pressing and releasing the + key followed by pressing the SET key.
3. Now the minute digits will start flashing.
4. Set the desired minutes by pressing and releasing the + key . If the + key is held, the units will increase by 5.
5. Press and release the SET key to move to the "Year Setting".
Note:
The unit will still try and receive the signal every day despite it being manually set. When it does receive the signal, it will change the manually set time into the received time. During reception attempts the WWVB tower icon will flash. If reception has been unsuccessful, then the WWVB tower icon will not appear but reception will still be attempted the next hour.
WWVB reception occurs daily at 12:00 am and 06:00 am. If the reception is not successful at 12:00 am, then the next reception takes place the next hour and so on until 06:00am, or until the reception is successful. If the reception is not successful at 06:00 am, then the next attempt will take place the next day at 12:00 am.
The other times WWVB reception takes place are upon setup and after manual time set exiting mode. Reception is generally not possible during daylight hours due to the interference of the sun.
------------

La Crosse... | Answered on Jul 28, 2014

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top La Crosse Experts

The Knight
The Knight

Level 3 Expert

76036 Answers

Cindy Wells

Level 3 Expert

5833 Answers

Brad Brown

Level 3 Expert

18031 Answers

Are you a La Crosse Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...