La Crosse Recent Questions, Troubleshooting Help & Support

in the clock set mode change from 24 to 12

http://www.lacrossetechnology.com/8300/index.php

Remove the battery for 5 minutes.

http://www.lacrossetechnology.com/media/catalog/product/w/s/ws-9611u-it.pdf Here is the method used to set up the outdoor transmitter with the base station

The manual for the thermometer is available on the LaCrosse site: http://www.lacrossetechnology.com/7034twcit/index.php . The direct link is http://www.lacrossetechnology.com/7034twcit/manual.pdf .

Put the batteries in the remote(s) first. (If you need to reset the units, pull the batteries from the indoor temperature sensor and the remotes for 10 minutes before restarting.) With the remotes and indoor sensor 3 to 5 feet apart, put the batteries in the indoor temperature sensor. Then wait 10 minutes before pressing any buttons. Once you have confirmed communication between the units, then move the remotes to their final location (not more than 330 feet away minus 30 feet for external walls or windows and 20 feet for each internal wall between the units.)

I hope this helps.

Cindy Wells

If the colon flashes after the time is set, then it will.

There is a nut on the shaft that holds the hands. It has loosened. You will have to disassemble the whole clock out of the case to access that nut

check out this video WT 8005U Atomic Digital Wall Clock

I do not have the same clock, but I assume the atomic receiver is the same. I found my clock went berserk if it was anywhere near anything else electronic. I had it on a dresser that was sharing space with my wireless printer. Once I relocated the printer, the clock went back to normal. You may have a different issue, but maybe check that nothing is around that would cause interference.

https://www.lacrossetechnology.com/support/manuals.php 3N6 its the technology named , but the model you can choose can be find on this site . Mabe the model and page are find on these pictures. la crosse 3n6 Google zoeken