La Crosse Measuring Tools & Sensors - Page 9 - Recent Questions, Troubleshooting & Support
Can not set time zone
Press the triangle shaped button to set the correct time
zone. It will toggle the clock mode through the
four available time zones in the Continental
U.S. Above the seconds digits, the LCD display
will indicate "P" for Pacific, "M" for Mountain,
"C" for Central and "E" for Eastern.
3/1/2011 12:25:41 AM •
La Crosse...
•
Answered
on Mar 01, 2011
Changed batteries and the outside
Bring the outside sensor inside. Take the batteries out of the sensor and out of the main unit. Wait 10 minutes. Put the batteries back in the remote sensor. Put the batteries back in the main unit. Do not touch any of the buttons. Wait 10 minutes. If the remote temperature is not showing within 10 minutes, try again. Once the remote temperature is showing, you can set the clock.
1/23/2011 11:48:22 PM •
La Crosse...
•
Answered
on Jan 23, 2011
Cannot get the outside temp
Bring the outdoor sensor indoors. Take the batteries out of the sensor and out of the main unit. Wait 10 minutes. Put the batteries back in the outdoor sensor. Put the batteries back in the main unit. DO NOT PRESS ANY BUTTONS. Wait 10 minutes or until the outdoor temperature shows. Once the temperature shows you may use the buttons to set the clock, etc. If it does not show after 10 minutes, then try again.
1/23/2011 11:33:29 PM •
La Crosse...
•
Answered
on Jan 23, 2011
Time is correct but date and day is not. How can
Press the SET button until the month if flashing. Then press the CH button until the correct month is showing. Press SET again so that the day is flashing. Press CH button until correct day is showing. Press SET so that the year is flashing. Press CH button until correct year is showing. Press SET until nothing is flashing. You should be done.
1/23/2011 11:30:34 PM •
La Crosse...
•
Answered
on Jan 23, 2011
Not finding what you are looking for?
