My nitro rc car keeps accelerating when it should
Either the throttle trim on your radio is set too high and it is not closing the carburetor to the idle position or it is closing all the way but your idle adjustment screw is holding the carb open too much. They only need to be open just a sliver. If that still doesn't solve it your low speed needle is set to lean. Find the factory needle settings for the engine and reset the needles the those positions.
1/11/2023 3:45:18 PM •
Kyosho 31351...
•
Answered
on Jan 11, 2023
•
287 views
Need original parts list for the kyosho astra
The internet is making everything easier for people to buy everything at fingertips. With many online auto parts store available like https://autopartsfair.com/used_engines/ it is easy to buy a parts for particular make and model of car. Check out an inventory and get good discounted deal.
1/16/2018 11:12:36 AM •
Kyosho Toys
•
Answered
on Jan 16, 2018
•
190 views
FACTORY MANUAL
http://www.kyosho.com/jpn/support/instructionmanual/digital_prcs/pdf/82119_Syncro_KT201_IM.pdf
Recently i bought a kyosho
for best run time you should run a 14.8v 4s lipo at 5000mah and around 30 to 40c. it will be very fast and give you excellent run time.
My new buggy does not
you either need to calibrate your hand controller to your esc or if your hand controller batteries are flat you will have no forward reverse
Can you tell me carberater
this is not exact but will give you an idea.its in pdf.
http://alshobbies.com/info/manuals/ultra%20lx_pro_manual.pdf
Kyosho Fazer non starting
You need to get the motor tuned. I would take to local hobby shop to have them help tune. I do not know where you are located so I can not recommend one. But your local shop should help you out at no charge. If I have motor make and size I can get you the tuning specks. If you want been in RC for 20 years now willing to help.
4/13/2009 6:49:15 AM •
Kyosho...
•
Answered
on Apr 13, 2009
•
395 views
Not finding what you are looking for?